An accessory part in 1:32 scale: a rocket launcher designated M65. It is an external armament element for a model, not a stand-alone model.
Responsibility details are not available.
A rocket launcher designated M65, rendered in 1:32 scale. It is an external armament element, that is a part fixed to a finished model from the outside, on a pylon or in the designated place on the airframe. Armament tends to be the weakest spot on models: in a kit it is often rendered in a simplified form, while the viewer's eye settles on it immediately after the silhouette of the machine. A replacement part evens out that mismatch and lets you build the machine in a form the kit itself does not offer.
Which machine and which kit the part is cut for is given in the manufacturer's instructions; check it before the build, because pylons and their spacings differ from model to model. Offer the part up dry and compare its attachment with the part from the kit before you reach for the glue.
Cut off surplus material and traces of manufacture with a sharp blade a short distance from the part and sand the remainder carefully, so that the shape is not damaged. Wash and degrease the surfaces before painting. The parts of accessory sets are usually not polystyrene, so choose the glue according to the material; cyanoacrylate glue holds on most of them, and on larger mating surfaces a two-part epoxy works well. A primer helps the finish to hold and at the same time shows the places where the surface still needs cleaning up.
The model, paints, glue and tools are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!