20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:32 MIG-29A (9-12)

A decal set for a model of the MiG-29A (9-12) in 1:32 scale for modelers who want colored detail without lengthy painting. It is applied to finished kit parts overcoated with gloss varnish.

Scale1:32
Manufacturer Kelik
Product EAN8591111266642

Responsibility details are not available.

33.56 €
27.74 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

MiG-29A (9-12) decal set in 1:32 scale

This is a decal set for a model of the MiG-29A fighter in production version 9-12 in 1:32 scale. It is not a kit or a finished model but an accessory that is applied to kit parts which have already been built and painted. Decals with a three-dimensional effect add color and depth where the detail on the plastic is only suggested.

The real subject

The MiG-29 is a twin-engine fighter with a pair of vertical tail surfaces and characteristic upper air intakes for taxiing on the ground. Version 9-12 is the basic single-seat form from which the other variants grew. The cockpit of this generation uses conventional instruments, without the large displays of later upgrades, so colored detail on a small area changes the overall impression of a model considerably.

How the set is applied

The base coat is what decides the result. First paint the surface and overcoat it with gloss varnish: on a matte surface microscopic air bubbles remain under the film and the edge of the decal takes on a silvery look. Release the decal in lukewarm water, move it into place, align it and carefully blot up the excess water. On curved surfaces a decal softener applied in small doses helps; do not move the set until it has dried. At the end unify the surface with a varnish according to how glossy you want the result.

What the set does on the model

The set replaces the flat kit parts: instead of engraved or merely suggested relief you get a colored and three-dimensional-looking surface without brush-painting tiny areas. It is a good idea to degrease the plastic before application and to level any coarse molded relief, so that the decal settles over its whole area.

Who the set is for

  • For modelers who build the MiG-29 in 1:32 scale and want to raise the level of detail quickly
  • For those who do not get on with brush-painting the smallest details
  • For modelers with basic experience of decals and softeners
  • As an accessory for a plastic kit, not as a substitute for the model

The set is an accessory for a kit, not a model in its own right. Paints, glue and decal softener are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a decal set, that is an accessory for a plastic kit. The model itself has to be bought separately.

Sets of this kind are stuck onto model parts that have already been built and painted, typically onto areas with fine detail. Check what the set covers on the box.

On a matte surface microscopic air bubbles remain under the decal and its edge begins to show through with a silvery look. Gloss varnish prevents this and the decal blends into the surface.

On a flat surface usually not. On shaped parts, however, it helps the decal settle without creases. Apply it in small doses and let it work without touching it.

Last seen

KelikRSK32-00061:32

1:32 MIG-29A (9-12)

A decal set for a model of the MiG-29A (9-12) in 1:32 scale for modelers who want colored detail without lengthy painting. It is applied to finished kit parts overcoated with gloss varnish.
In stock
33.56 €
1:48 A-7 Corsair postion lights
-20 %
Favorite
Aires/QuickboostQB483781:48

1:48 A-7 Corsair postion lights

Position lights for the A-7 Corsair are a resin detail part in 1:48 scale from Quickboost. It is not an airplane model but an accessory. It is supplied unassembled and unpainted.
In stock
6.36 €5.09 € You save 1.27 €
BLUE RAL 5001 – RC MARKER
-20 %
Favorite
AK interactiveRCM006

BLUE RAL 5001 – RC MARKER

A modeling pen of the RC Marker range in a shade to the RAL chart, RAL 5001, that is a green blue. It is applied straight from the tip and suits small areas and markings.
In stock
1.96 €1.57 € You save 0.39 €
Purple Mechas Colour Set-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-7157

Purple Mechas Colour Set

AMMO Purple Mechas Colour Set is a set of six water-thinnable acrylic paints focused on purple shades for sci-fi robots, mechas and figures.
Last one!of 3
15.96 €11.96 € You save 4 €
1:48 Traditional Vietnamese hat
-20 %
Favorite
Firma4949F011/481:48

1:48 Traditional Vietnamese hat

A traditional Vietnamese conical hat in 1:48 scale is an accessory for figures, not a model on its own. It gives a scene an unmistakable local setting with a single small part.
In stock
4.36 €3.49 € You save 0.87 €
MontexMXSM350131:35

1:35 M4A3 SHERMAN

A sheet of cut self-adhesive masks for painting the wheels of the M4A3 Sherman tank in 1:35 scale, shaped to the kit of the Dragon brand.
In stock
3.96 €
I Love KitILK635491:35

1:35 LVSR MKR16 Tractor

The LVSR MKR16 is an injection-molded plastic model of the modern American heavy logistics tractor of the Marine Corps in 1:35 scale from I Love Kit. The model is supplied unassembled and unpainted.
In stock
71.96 €
1:32 Bf 109E exhaust
-20 %
Favorite
Aires/QuickboostQB320551:32

1:32 Bf 109E exhaust

Quickboost exhausts for the Messerschmitt Bf 109E in 1:32 scale. A resin replacement for the exhaust stubs from Aires, for more faithful engine detail.
In stock
6.36 €5.09 € You save 1.27 €
Very smooth saw (both sides) 1pc
-20 %
Favorite
CMKH1002

Very smooth saw (both sides) 1pc

Very smooth saw (both sides) from CMK is a fine modeling saw blade with teeth on both edges for precise cuts from either side. It is not a kit but a tool.
In stock
4.76 €3.81 € You save 0.95 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.