The stencils 1:32 P-61 B Black Widow - National Insignia and Markings are used to spray the American national insignia and the additional markings of the night fighter.
Responsibility details are not available.
The American star in a circle with bars at the sides is among the largest insignia applied to an aircraft. In a large scale a decal of that size has trouble seating over rivets and panel transitions, and that is exactly why it pays to spray it directly in paint.
Night machines tended to be painted very dark, so every light element behaves differently on them than on ordinary camouflage. White over a dark base covers slowly and needs several really thin coats; with a heavier application a step appears at the edge that shows under a side light. The solution is usually to lay a light base under the place for the insignia and only then spray the target shade into it, because fewer coats are then enough and the edge stays low.
Place the insignia according to the drawing in your kit and check its position against the longitudinal axis of the fuselage before spraying. Apply the paint square to the surface so that it does not get under the edge of the stencil. Time the lifting off for shortly after the last coat has set, while the edge is still flexible. On the large areas of the fuselage it has proved best to work one insignia at a time rather than all of them at once: you then keep track of the number of coats and nothing dries standing up in the meantime.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!