1:32 Westland Whirlwind Mk.I Mask

Westland Whirlwind Mk.I – masking set 1:32 (Special Mask)

This item is not an aircraft model but an accessory. It is a pre-cut masking set intended for a model of the British Westland Whirlwind Mk.I fighter in 1:32 scale. The masks serve to mask the glazing and any other areas accurately and quickly before spraying. The exact composition of the set and the number of individual pieces are given on the packaging by the manufacturer.

What the accessory is for

Masking the canopy framing with tape by hand is a slow job in the large scales and the result tends to be uneven. A pre-cut mask follows the shape of the frame, holds a sharp edge and saves time. On the twin-engine Whirlwind, with its fairly busy canopy, that is a noticeable saving in work.

Usage tips

• Degrease the clear parts before masking and let them dry completely
• Move the mask with pointed tweezers or the tip of a scalpel, not with your fingers
• Press the edges down with a toothpick after applying, so that paint does not creep under the edge
• Spray in thin coats; a heavy coat lifts the edge of the mask
• Take the mask off while the paint has only just flashed off, not once it has fully cured

Who the set is for

For modelers who are building the Whirlwind Mk.I in 1:32 scale and want clean canopy framing without slow masking by hand. Before buying, check that the set matches the kit you are building — the masks are cut for a particular shape of glazing.

The accessory is supplied unpainted; paints and glue are not included in the package.