1:35 Bell AH-1G TFace

The Bell AH-1G TFace 1:35 is a set of Eduard painting masks for the glazing of a model of the attack helicopter. The TFace design covers the outer and the inner side of the cockpit.

Scale1:35
Manufacturer Eduard
Product EAN2591111783591

Responsibility details are not available.

10.40 € 7.80 €
6.45 € without VAT
−25 % You save 2.60 €
6 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Bell AH-1G TFace 1:35, painting masks (Eduard)

Accurately cut self-adhesive masks from the Czech manufacturer Eduard for a model of the Bell AH-1G attack helicopter in 1:35 scale. The TFace designation means that the set contains masks for the outer and the inner side of the glazing. The inner masking matters on helicopters with a large area of glazing, because the frames are clearly to be seen from inside the cockpit and leaving them in the color of the clear plastic has a distracting effect. The set is an accessory to a plastic model, and the customer acquires the basic kit separately.

The real subject

The Bell AH-1G HueyCobra was the first production helicopter designed directly for combat support. It came about on the dynamic components and the powerplant known from the UH-1 family, but was given a completely new narrow fuselage with seats arranged in tandem and short stub wings. It is precisely the slender fuselage and the extensive glazing of the tandem cockpit that make the glazing the most striking element of the model, so cleanly unmasked frames pay off.

Usage tips

Wash the glazing before masking in lukewarm water with a drop of dish soap and let it dry freely, so that the mask adheres well. Lift the mask off the sheet with tweezers and press it down with a toothpick, mainly on the edges. Apply the paint in several thin coats, a heavy coat will run under the edge. Take the mask off while the paint is freshly dry, carefully and at a sharp angle. A stick dipped in water, not in thinner, will remove the remains of the adhesive. Stick the inner masks on and spray them over with the color of the interior before you seat the glazing in the fuselage.

Who the set is for

  • Builders of the AH-1G helicopter in 1:35 scale
  • Modelers who want sharp frames of the glazing without painting by hand
  • Those who build a cockpit with a visible interior and need the frames from the inside as well
  • Anyone who would rather keep clear of masking tape and a knife

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The set contains masks for both sides of the glazing, that is the outer and the inner one. The frames thus look right when looking into the cockpit from the inside as well.

No. This is a masking set. You buy the plastic model of the AH-1G in 1:35 scale separately.

Ideally shortly after the paint has dried, while the coat is still flexible. Peel it off slowly and at a sharp angle, so that the edge of the paint is not torn away.

Yes. Kits of the AH-1G are made in this scale, so the set of masks is intended precisely for them, not for models in 1:32.

Last seen

1:35 Bell AH-1G TFace-25 %Stock ClearanceFavorite
EduardJX3211:35

1:35 Bell AH-1G TFace

The Bell AH-1G TFace 1:35 is a set of Eduard painting masks for the glazing of a model of the attack helicopter. The TFace design covers the outer and the inner side of the cockpit.
6 leftof 9
10.40 €7.80 € You save 2.60 €
HaulerHLX483541:48

1:48 GAZ-M415 Pickup (ACE)

Hauler 1:48 GAZ-M415 Pickup is a photo-etched brass detail set for sharpening up the model of the Soviet GAZ-M415 pickup in 1:48 scale. This is an accessory, not a kit.
In stock
10.36 €
CMKCMK42331:48

1:48 TSR-2 Correction set pilots canopy for Airfix

The CMK 1:48 pilot's canopy correction set for a model of the British TSR-2 aircraft brings a shape-corrected clear canopy.
In stock
9.96 €
New WareNWAM03431:48

1:48 Mask FW 200C-4 Condor BASIC (TRUMP 02814)

The New Ware 1:48 FW 200C-4 Condor BASIC mask set is the basic grade of masking for the model of this four-engine aircraft. The cut self-adhesive masks fit the shape of the parts with no measuring needed.
In stock
5.56 €
TamiyaTA325991:48

1:48 Russian Medium Tank T-34-85

The 1:48 Russian Medium Tank T-34-85 is a plastic kit of the Soviet T-34-85 medium tank in 1:48 from the Japanese manufacturer Tamiya.
In stock
22.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.