1:35 Camouflage Paint Masks For Char 2C Meng Model Super Heavy Tank is a set of stencils for spraying an intricate camouflage pattern onto the French super-heavy tank in 1:35 scale.
Responsibility details are not available.
The stencils are cut to the shape of one particular oversized hull, not as a universal sheet. They cover the large areas of the sides, the turrets and the superstructure, so they belong among camouflage masks: the model is wrapped in them practically entirely and they are worked with in sections.
The French Char 2C came about at the end of the First World War as a breakthrough colossus and only ten were built. It weighed around seventy tons, measured over ten meters and had two turrets: the front one with a gun and the rear one with a machine gun. A crew of more than ten operated it. It never properly got into action and the machines ended up destroyed during rail transport in 1940. That is precisely why its coloring is interesting: multicolored fields separated by dark lines, the typical French interwar signature, which stands out on such an enormous area.
Spray the lighter tone first, let it cure thoroughly and only then start masking. Lay the stencil on from the bottom upward and fit the edges carefully to the rivets and the strips, because that is exactly where the paint likes to creep under most. The dark dividing lines are best dealt with at the end with a fine brush, so that they stay sharp.
The package contains only masking stencils.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!