1:35 Factory gate (large) with door

RT-Diorama 1:35 Factory gate (large) with door - a large factory gate with a door

A diorama element in 1:35 scale from RT-Diorama. It is not a kit of a vehicle and not a finished building but an architectural accessory in its own right: a large factory gate with a separate door for people on foot set into its leaf. You set the element into a wall of your own on a hall, a workshop or a storage yard.

What a gate is for in a scene

A gate is a natural center of attention in a diorama. It settles where equipment drives into a complex and gives a scene its scale, because the viewer immediately compares its size with a figure or a vehicle. A door set in is an ordinary solution on factory gates - a gatekeeper or a worker goes inside without the whole leaf being opened. For a scene that tells a story it is a rewarding detail: a half-open door with a figure in the opening creates action even on a small area.

Tips for placing it in the scene

• Draw the opening in the wall out from the element, not the other way around - a tight seating with no joints will result.
• Decide in advance whether the gate will be closed or open; an open leaf calls for a piece of the yard behind it to be carried through.
• Do not leave empty space behind the opening; a dark area or a suggestion of an interior will prevent the set-piece effect.
• Patina around the hinges and the bottom edge stands out best when it follows on from the weathering of the surrounding masonry.

Who the element is for

• Builders of dioramas in 1:35 with factory or storage buildings
• Modelers who put structures together out of individual elements instead of finished set pieces
• Scenes with equipment driving in, a checkpoint or a figure on foot in the passage