1:35 KAMAZ 65115 3D printed colored interior on decal paper is a Quinta Studio accessory set for the Zvezda dump truck kit. It is not a model of the vehicle but an interior detail.
Responsibility details are not available.
The Quinta Studio set is 3D printed directly onto decal paper and is supplied already painted. These are not resin parts to be glued but a decal with a real thickness and three-dimensional relief, applied the wet way. The set is cut for the Zvezda kit in 1:35 scale. In extent it is a smaller item aimed at the cab, that is above all at the instrument panel and the surrounding areas.
The KAMAZ 65115 is a three-axle truck in a dump body configuration, used in construction and in ordinary haulage. The cab is set above the engine, the glazing is large and when a model is built there tends to be a good view into it, especially if you leave the doors open or place the model in a diorama. The interior of a commercial vehicle is moreover typically full of small controls and lettering that are hard to paint by hand.
Spray the areas of the cab with a base color first, so that the plastic does not show through the thin layer. Cut the elements out with a sharp scalpel, soak them briefly in warm water and slide them into place; the position can be adjusted with a brush and water. Do not use a decal softener or a setting solution, because their chemistry would damage the printed resin and ruin the element. Only press the element down with a soft brush and do not run the brush over the surface, or the relief will smear or tear. On edges work in two stages with drying in between. Even the finished interior out with a matte varnish and only then add dust and dirt, so that they settle into the relief.
This is an accessory set, not a model. The kit, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
