LAST CHANCE! 20% OFF Ends Tonight!
1:35 Modern CM11 Brave Tiger Main Battle Tank(For AFV AF35315)

1:35 Modern CM11 Brave Tiger Main Battle Tank(For AFV AF35315)

26.36 €
Add to Cart

1:35 Modern CM11 Brave Tiger Main Battle Tank(For AFV AF35315)

A Voyager Model photo-etched set for the CM11 Brave Tiger tank in 1:35 scale. An accessory to a plastic model that adds small mounts, loops and baskets in a scale-correct thickness.

Scale1:35
Manufacturer Voyager Model
Product EAN8591111105828

Responsibility details are not available.

26.36 €
21.79 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

CM11 Brave Tiger 1:35 - a photo-etched set from Voyager Model

A set of photo-etched parts in brass sheet for a plastic model of the CM11 Brave Tiger main battle tank in 1:35 scale. It is not a model of a vehicle, but a detailing accessory: it is fitted to a kit under construction and replaces parts that are simplified or too thick in injection molded plastic.

Where it shows on the CM11

The CM11 came about by joining a turret of older design with a hull of a newer type, which showed on the surface of the vehicle as a multitude of mounts, brackets and stowage baskets added afterwards on the turret and at the rear. It is precisely the baskets and their frames that are the hardest nut for plastic — a real basket is made of thin sections and mesh, and in a kit it tends to end up as a solid wall with a suggested grid. In photo-etched metal the basket is really cut through, and you can even load something into it. The small loops for securing equipment and the frames of the headlights come out the same way: in plastic they are molded raised detail, in brass they are separate parts with a visible gap underneath.

Tips for working with photo-etched parts

Work out the procedure for the small loops in advance, otherwise they will cost you your nerves. Do not cut the part off completely — bend it first, while it is still held in the fret, and only then separate the last tab. Work over a light-colored surface with a raised edge, ideally with a magnetic dish at hand; you will never find a part two millimeters across once it has flown off into the carpet. Apply the glue by putting a drop of cyanoacrylate glue on a piece of film and dipping the tip of a needle or a piece of wire into it — a drop straight from the bottle is always too big for parts like these. Cut away the molded raised detail left by the original plastic mounts before fitting and sand the surface smooth.

Who the set is for

  • Modelers building modern equipment in 1:35 with a taste for fine detail.
  • Those who want real loops and cut-through baskets instead of plastic relief.
  • Experienced builders who do not mind handling very small parts.

It is an accessory, not a kit. The model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

With the parts that the photo-etched metal replaces, yes. The plastic relief of the loops and mounts is cut away and the surface sanded, otherwise the new part will not sit down.

Put a drop of cyanoacrylate glue on a piece of film and pick it up with the tip of a needle. A drop straight from the bottle floods the part and dulls the surrounding surface.

It is not. These are photo-etched parts only. The base kit has to be bought separately, and you need to verify that the set is intended for it.

Last seen

Voyager ModelPE3511151:35

1:35 Modern CM11 Brave Tiger Main Battle Tank(For AFV AF35315)

A Voyager Model photo-etched set for the CM11 Brave Tiger tank in 1:35 scale. An accessory to a plastic model that adds small mounts, loops and baskets in a scale-correct thickness.
In stock
26.36 €
ETA dioramaETA1041:35

1:35 Leaves of tropical plant

A set of leaves of a tropical plant in 1:35 scale for building a diorama and display scenes.
In stock
3.96 €
FlyhawkFH7100651:700

1:700 HMS Lively 1941 Photo-Etched Parts

1:700 HMS Lively 1941, photo-etched parts is an accessory set of photo-etched parts for refining the model of the British destroyer from Flyhawk.
In stock
19.96 €
ETA dioramaETA8221:35

1:35 Wall & Wood In Sky Blue Color (Interior Home Decoration)

ETA diorama Wall and Wood in sky blue, 1:35 is a scenic accessory for a diorama: printed paper sheets with a wall and wood paneling pattern for interior scenes.
In stock
7.96 €
Dynamo-ModelsDNMA90534-25

34th SS Volunteer Grenadier Division 'Landstorm Nederland' Plaque 25mm

The Landstorm Nederland plaque 25 mm in size from Dynamo-Models carries the emblem of the 34th SS volunteer grenadier division according to the name of the item. It is a diorama accessory for marking a base, not a model.
In stock
2.36 €
AoshimaAO053731:24

1:24 Glassenheit DISIX Revo 20 Inch

A set of four alloy wheels and tires, Glassenheit DISIX Revo 20 inch , from Aoshima in 1:24 scale. It is not a model of a car but an add-on wheel set for tuning kits of passenger cars.
In stock
9.56 €
Dead DesignUC720371:72

1:72 A-7 Corsair II - Undercarriage Bays Mask for Fujimi

Stencils for painting the landing gear bays of the A-7 Corsair II attack aircraft in 1:72 scale , cut for the kit of the Fujimi brand.
In stock
4.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.