1:35 Modern US Army M1A1/A2 Bustle Rack Extension

1:35 Modern US Army M1A1/A2 Bustle Rack Extension

21.16 €
Add to Cart

1:35 Modern US Army M1A1/A2 Bustle Rack Extension

A turret bustle rack extension for the M1A1 and M1A2 in 1:35 scale is a photo-etched set from E.T. Model. It adds an extension of the rack for crew equipment to a model; the tank is not part of the package.

Scale1:35
Manufacturer E.T. Model
Product EAN8591111731539

Responsibility details are not available.

21.16 €
17.49 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Bustle rack extension for the M1A1 and M1A2 1:35 (E.T. Model)

A photo-etched set in 1:35 scale from E.T. Model with an extension of the bustle rack on the turret of the American M1A1 and M1A2 Abrams tanks. The so-called rack extension enlarges the space for the personal equipment, crates and material of the crew, and it is a modification typical of vehicles in long deployments. The set holds photo-etched mesh and frame parts; it is not a kit of the tank.

What the set is for

The rack is made of wire mesh, that is of a material that cannot be produced convincingly in injection-molded plastic: a plastic mesh has thick sections and solid areas where there should be openings. Photo-etched metal is open and thin, so a finished rack looks like wire and the load inside shows through it. A loaded rack is at the same time the most prominent part of the rear of the turret to look at, and it changes the character of the model a great deal.

Building and painting tips

Bend the frames along the score lines and assemble the whole rack off the model first, so that it keeps right angles; check it against a rule. Glue the mesh areas with a minimum of cyanoacrylate applied on the tip of a wire, because any excess floods the openings of the mesh and the see-through effect disappears. Degrease the metal with alcohol and spray a base coat for metal before painting. Paint the rack separately, and only then fill it with the load and seat it on the turret. Inside, tarps made from aluminum foil or from two-part putty, crates and rolled canvas work well; a final layer of dust joins everything together.

Who the set is for

  • Builders of modern American tanks in 1:35 scale
  • Modelers who build a vehicle in an operational, loaded condition
  • Diorama builders with lived-in vehicles
  • More experienced modelers with experience of assembling photo-etched mesh

This is an accessory photo-etched set, not a complete model. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It enlarges the storage space at the rear of the turret for the equipment and material of the crew. On a model it is a prominent item to look at that gives the vehicle an operational character.

It is not. It is an accessory set for your own model in 1:35 scale.

A molded mesh has coarse sections and often solid areas instead of openings. Photo-etched metal is thin and genuinely open.

Assemble the rack and paint it separately first, then put crates, rolled canvas or tarps made from a formable putty into it, and finally seat the whole thing on the turret.

Last seen

E.T. ModelEA35-0421:35

1:35 Modern US Army M1A1/A2 Bustle Rack Extension

A turret bustle rack extension for the M1A1 and M1A2 in 1:35 scale is a photo-etched set from E.T. Model. It adds an extension of the rack for crew equipment to a model; the tank is not part of the package.
In stock
21.16 €
SBS ModelSBS720171:72

1:72 Bristol Blenheim engine (Bristol Mercury)

A resin Bristol Mercury engine in 1:72 scale is a detail accessory for sharpening up the powerplant of a model of the Bristol Blenheim light bomber.
In stock
13.16 €
DSPIAEDS56015-24

Tungsten Steel Drill Bit 2.4mm for Plastic Models

The DSPIAE 2.4 mm tungsten steel drill bit is a single modeling bit for plastic. The drilled hole is only the first step; it is the cleaning up and the gluing that decide the result.
In stock
1.96 €
SpalahSP306351:35

1:35 Machine gunner with DShKM and zombies

Machine gunner with a DShKM and zombies is a resin, 3D printed figure set in 1:35 scale from the Ukrainian manufacturer Spalah that joins a military and a horror subject.
In stock
47.96 €
Model SceneMK200

Modřín , vysoký kmen 180-220 mm

Larch with a tall trunk is a finished handmade Model Scene model tree roughly 180 to 220 mm tall, ready to be set into a scene.
In stock
5.96 €
Quinta StudioQP00018

Raised panel lines and smooth welds, Medium relief (for all kits)

Raised panel lines and smooth welds - medium relief is a 3D-printed relief decal set that adds a raised surface texture to a model without engraving or etching.
In stock
8.36 €
Model SceneVGN-008

Orobinec (rákosí) N

Cattail (reeds) in the version for N scale is Model Scene scenery vegetation for the banks of water and wetlands in small scales.
In stock
5.16 €
DK DecalsDK721061:72

1:72 B-24D Liberator 90th Bomb Group

B-24D Liberator 90th Bomb Group in 1:72 scale is a decal sheet from DK Decals devoted to the Liberators of one of the American bomb groups in the Pacific.
In stock
15.16 €
RB modelRB48P11

76,2mm OQF 17 pounder

76.2mm OQF 17 pounder is a turned metal gun barrel from RB model reproducing the British anti-tank gun.
In stock
6.76 €
HatakaHTK-CS27

Falklands Conflict paint set vol. 1

Eight lacquer paints for the Argentine aircraft of the Falklands conflict, including three shades of the field camouflage of the Pucara.
In stock
21.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.