Masking stencils for spraying Soviet wartime markings in 1:35 scale. The set aims at the KV-1, KV-2 and T-34 tanks and at the B-4 howitzer.
Responsibility details are not available.
Soviet equipment of the Second World War carried markings sprayed through a stencil right in the field: tactical numbers, unit markings and lettering on the turret and on the sides. A stencil was quick and undemanding, and that is why the markings sit even where a decal would struggle. The set covers four well-known machines. The KV-1 and KV-2 are heavy tanks from the beginning of the war, the KV-2 being recognizable at first glance by its tall angular turret. The T-34 is the most widespread Soviet tank of the war. The B-4 is a heavy howitzer on a tracked carriage, which the artillery used against fortifications.
Die-cut stencils for spraying the markings of the machines stated. A sprayed marking arises directly in the paint of the surface, so it has no glossy edge and does not lift on the rough surface of a turret or on the welds.
Lay the stencil on only onto a perfectly dried base shade and press the edges down over the whole area, especially on the welds and on the edges. Spray the paint in several passes and only thinly; a single heavy layer will creep under and the lettering will smear. Take the stencil off as soon as the paint has set. A sprayed marking then stands up to a wash and a dry brush without peeling off. The procedure for fixing the stencils is given in the manufacturer's instructions.
For builders of Soviet equipment in 1:35 scale who want their markings sprayed in paint. The model, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!