An add-on set of front wheels for a model of the Sd.Kfz. 251 half-track carrier in 1:35 scale, with an angled tread pattern and with the flattening under load rendered.
Responsibility details are not available.
This is not a kit of the vehicle but an add-on set of front steered wheels for a model of the German Sd.Kfz. 251 half-track carrier in 1:35 scale. The tires have an angled tread pattern and are rendered with flattening, that is, the way they look under the weight of the vehicle. SBS Model also makes the variant with the ordinary tread pattern, so you choose according to the pattern the vehicle on your reference had.
The front wheels of a half-track are the only pneumatic part of the chassis, and that is exactly why they draw the eye. Wheels off the sprues tend to be perfectly round and make it look as if the vehicle were standing without a load; a flattened tire, by contrast, settles the model onto the ground at once and the scene looks livelier. The second difference is in the tread pattern, which varied on period tires and is clearly legible on a finished model.
Rinse the parts in lukewarm soapy water and let them dry. Separate them from the print supports with a sharp knife or a fine saw. Flattened wheels make sense only when you glue them in the right position, so first try dry how they seat on a surface with their contact patch, and only then glue them with cyanoacrylate glue. Paint the wheel rim and the tire separately; a thin strip of masking tape between them helps. Dust and fine pigments suit the tread, so that the pattern stands out.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!