1:35 STRIPS w/nuts 0,6-1,1mm (total dimensions 100x50mm)

1:35 STRIPS w/nuts 0,6-1,1mm (total dimensions 100x50mm)

7.16 €
Add to Cart

1:35 STRIPS w/nuts 0,6-1,1mm (total dimensions 100x50mm)

Photo-etched strips with imitation nuts in widths of 0.6 to 1.1 mm in 1:35 scale from the Czech maker Hauler are a modeling material on a sheet with overall dimensions of 100x50 mm, not a kit. They serve to detail models you have already bought.

Scale1:35
Manufacturer Hauler
Product EAN8591111778756

Responsibility details are not available.

7.16 €
5.92 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched strips with nuts 0.6 to 1.1 mm, 1:35 scale

A photo-etched sheet with overall dimensions of 100x50 mm, on which there are strips in several widths from 0.6 to 1.1 mm with etched imitations of nuts and bolts. It is not a kit, nor a set tailored to one particular model, but a universal modeling material from which you cut off exactly the piece you need. Hauler is a Czech maker of photo-etched accessories.

What the strips are used for

Most often they replace details that cannot be molded in plastic or that look coarse: bolted and riveted joints on armor, the securing straps of tanks, flanges, the rims of hatches, brackets and mounting feet. The second great use is repair: after seams have been sanded, a whole series of rivets is lost from a model, and a strip is the quickest way of returning an area to its original form. The third is building parts to your own drawings, where the strips come into their own as a ready ground.

Tips for working with photo-etched parts

Cut the strips off with a sharp scalpel on a hard surface; scissors deform photo-etch and the nuts get crushed. Degrease both the surface and the photo-etch before gluing. It is glued with super glue; the gel is easier to position with, while the thin kind is drawn in by capillary action once the part is in place. Shaping can be managed by a bender or by two razor blades clamped in jaws; stiffer material can be annealed briefly over a flame so that it softens, but only in passing and with your hands protected. A primer for metal is necessary before painting, because bare photo-etch will not hold paint and rubs off while handled.

Who the material is for

  • modelers detailing military equipment in 1:35 scale
  • for repairing riveting and bolting after seams have been sanded
  • for building parts of your own and modifications from photographs
  • more advanced modelers who have already worked with photo-etch

This is an accessory material, not a kit. The model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a universal photo-etched material from which you cut off the length of strip you need for any model in 1:35 scale.

With a sharp scalpel on a hard surface. Scissors deform photo-etch and the etched nuts get crushed.

With super glue. The gel variant lets you fine-tune the part, while the thin kind is drawn in by capillary action once it is in place.

Yes. Without a primer for metal the paint rubs off the photo-etch while it is handled.

Last seen

HaulerHLU350021:35

1:35 STRIPS w/nuts 0,6-1,1mm (total dimensions 100x50mm)

Photo-etched strips with imitation nuts in widths of 0.6 to 1.1 mm in 1:35 scale from the Czech maker Hauler are a modeling material on a sheet with overall dimensions of 100x50 mm, not a kit. They serve to detail models you have already bought.
In stock
7.16 €
EduardED3DL482721:48

1:48 B-17F - Cockpit & Nose interior 3D decals for Revell

B-17F – cockpit and nose interior 3D decals 1:48 (Eduard) is a set of layered 3D decals and steel photo-etched parts for a faithful interior of the heavy bomber. It is not a model but an accessory.
In stock
27 €
EduardED64810201:48

1:48 Boeing B-17F Flying Fortress wheels diamond tread

Diamond tread wheels for the Boeing B-17F Flying Fortress in 1:48 scale from Eduard fit the Flying Fortress with tires in a pronounced tread pattern.
In stock
9 €
AiresAIR44911:48

1:48 F-5E Tiger II speed brakes

Aires F-5E Tiger II - resin speed brakes (1:48) . A resin accessory with finely cast airbrakes and their wells for a plastic kit of the light fighter.
In stock
10.80 €
Mettalic DetailsMDR144551:144

1:144 Curtiss-Wright CW-21 with etched parts and decals (3D-Printed)

Metallic Details 1:144 Curtiss-Wright CW-21 is a 3D-printed resin kit of the American light fighter supplemented with photo-etched parts and decals, intended for experienced modelers.
In stock
20.36 €
LifecolorLIFUA484

UA484 - US Army Uniforms ERDL Brown Matt

Lifecolor US Army Uniforms ERDL Brown is a matte water-thinnable acrylic paint in a 22 ml container for the brush and the airbrush alike.
In stock
2.76 €
FlyhawkFH30201:72

1:72 Pz.Kpfw. VI Ausf. B Königstiger

The Pz.Kpfw. VI Ausf. B Königstiger in 1:72 scale from Flyhawk. A plastic kit of the heaviest German production tank.
In stock
21.16 €
AIRTIS, THE BARBARIAN GNOME – 54MM-25 %Stock ClearanceFavorite
AK interactiveRAGE026

AIRTIS, THE BARBARIAN GNOME – 54MM

Airtis, the Barbarian Gnome is a collector figure of a gnome in a barbarian treatment, in 54 mm size from the brand AK Interactive, supplied as a casting to be painted.
Last one!
29.16 €21.88 € You save 7.28 €
Exito decalsEXDE480131:48

1:48 Eastern Front Fighters vol.2 - Yak 1b - Bf 110 - Bf 109

1:48 Eastern Front Fighters vol.2 is a decal sheet in 1:48 scale with markings of machines of the Eastern Front, specifically the Yak-1b, the Bf 110 and the Bf 109.
In stock
13.16 €
Titans HobbyTTH212

Shrubery Blooming Pink 15 mm (15 x 15 cm)

Titans Hobby Shrubery Blooming Pink 15 mm (15 x 15 cm) are scenic tufts of flowering low vegetation for dioramas with pink blossoms, with the growth 15 mm tall.
In stock
9.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.