A deck masking sheet for a model of the battleship Bismarck in 1:350 scale from Artwox Model. Pre-cut masks render the laying of the deck planks in paint, with no veneer to glue on. Intended for the Tamiya 78013 kit.
Responsibility details are not available.
This accessory is purely an aid for painting. It contains pre-cut masks following the laying of the planks of the wooden deck of a model of the battleship Bismarck in 1:350 scale. The cut matches the Tamiya 78013 kit, because every manufacturer divides decks differently, so please check that this is the one you have.
The deck has to be sprayed before the superstructures, turrets, cranes or railings go onto it. Once the model is assembled you will no longer reach many places with a mask and laying film precisely around finished parts is needless torment. Lay the build out so that the deck goes through its base coat, the masking and the second tone while it is still a separate part or on a bare hull.
Carry the film with tweezers and lay it dry in several stages; with one large application it almost always ripples somewhere. Before spraying, go over the edges with a toothpick so that they are pressed down. Once the mask is off it pays to look over the gaps in raking light: small overflows of paint are hidden with a thin stroke of the brush in the base shade and the whole panel does not have to be redone because of them.
This is an accessory to a kit, not a model. Paints, glue and the base kit are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!