An acrylic modeling paint from the Number 5 line, the manufacturer's part number N5-C163. The shade is tied to the car designated GT40 and to one particular color scheme.
Responsibility details are not available.
An acrylic modeling paint from the Number 5 line with the part number N5-C163. The name of the shade is tied to the car designated GT40 and to one particular color scheme. The shade itself cannot be read from the name. Compare the tone with the manufacturer's color chart, where the shade is shown.
Sand the surface smooth, wash it and degrease it. On greasy plastic acrylic paint draws into drops and comes away with the masking tape when it is peeled off. Stir the bottle thoroughly before use, as the pigment settles to the bottom and unstirred paint covers unevenly.
Apply several thin coats with a short pause between them, as one heavy coat floods the fine engraving of the panel lines and builds up runs on the edges. Thin it with the thinner intended for this line of paints, as a thinner from another line can curdle the paint into grains. The manufacturer gives the thinning ratio and the pressure in the airbrush in the instructions on the packaging. Use an airbrush on a body and leave the brush for small parts. Always try the paint first on an offcut or on the inside of a part, which lets you check both the tone and the behavior on the given ground. Stick masking tape only onto a fully dried coat.
For builders of racing car models who put a color scheme together from the ready shades of a given line. It is the paint on its own, and thinner, clear varnish and spraying equipment are not supplied with it, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
