A colored printed interior for the AV-8A early in 1:72 scale from Quinta Studio is a set of interior elements on decal paper that refines the pilot's compartment without cutting plastic. The set is intended for the Airfix kit.
Responsibility details are not available.
This item is not an aircraft kit but an accessory for the cockpit. The name states that these are printed, colored interior elements carried on decal paper for the early version of the AV-8A attack aircraft in 1:72 scale. The elements are taken off the sheet just like an ordinary decal and settled onto the surfaces of the pilot's compartment, where they replace flat engraving and save lengthy painting of tiny dials. It is based on the dimensions of the Airfix kit.
Under the AV-8A designation the US Marine Corps introduced the British V/STOL attack aircraft, the Harrier, in the 1970s. Its swiveling nozzles allowed it to take off from a very short run and from the deck of amphibious ships and to operate away from conventional airfields. The early machines had a differently equipped cockpit from the later modifications, and it is precisely this state that this variant of the set is tied to.
First level the surface, paint it in the darker tone of the cockpit and go over it with a gloss clear coat, as the element will not hold on a matte surface. Cut the sheet close to the outline of the element so that no visible edge of the carrier film stays behind once dry. Do not use a decal softener or a setting solution, and press the element down with a cotton swab so that it follows the floor and the side walls. Finally unify the whole with a matte varnish.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!