1:72 Avro Anson T.21/Anson C.19 canopy airbrush mask for Valom /VLM

1:72 Avro Anson T.21/Anson C.19 canopy airbrush mask for Valom /VLM

5.16 €

1:72 Avro Anson T.21/Anson C.19 canopy airbrush mask for Valom /VLM

A masking set for the glazing of the Avro Anson T.21 and C.19 aircraft, for the Valom kit in 1:72 scale.

Scale1:72
Manufacturer MH models
Product EAN8591111435017

Responsibility details are not available.

5.16 €
4.26 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Avro Anson was a British twin-engine aircraft that stayed in service for many years and went through a string of modifications. The C.19 and T.21 versions belong to its postwar form and served for transport and communications duties and for crew training. What they share is extensive cabin glazing, which is the most patient work in building the model.

What the set is for

The set holds masking parts for the glazing, shaped for the Valom kit in 1:72 scale. Instead of cutting strips of tape by hand, you stick down ready-made shapes that follow the frames of the glazing. The boundary between glass and frame then comes out crisp even where the individual panes are tiny and there are many of them side by side. On a cabin with that many panes it saves several hours of work.

How to use the masks

First wash and degrease the clear parts. Lay the masks on the dry surface before spraying and press them down all around with a toothpick, so that no paint creeps under the edge. Spray in several thin coats and let them set between applications; one heavy coat creeps more easily. Take the masks off shortly after the paint has dried, pulling at a shallow angle to the surface. The longer they stay on the model, the harder they are to remove.

Who it is for

The set will be appreciated by anyone building the Anson in 1:72 scale who does not want to spend an evening cutting tape. A crisp transition between glass and frame does more for the final impression than most small accessories. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The Avro Anson T.21 and C.19 kit from Valom in 1:72 scale.

Before the paint is sprayed, onto clean, degreased glazing. Press the edges down so that paint does not creep under them.

Shortly after the paint has dried, pulling at a shallow angle to the surface. The longer they stay on the model, the harder they are to remove.

No, it is an add-on set of masks. The kit, paints and glue are not included, unless stated otherwise.

Last seen

MH modelsMHSX721171:72

1:72 Douglas DB-7 canopy airbrush mask /AZRFR,SPH

A masking set 1:72 Douglas DB-7 prepares the cockpit glazing of this twin-engine attack aircraft.
In stock
5.16 €
New WareNWAM12631:72

1:72 P-43 Lancer kabuki masks

1:72 P-43 Lancer kabuki masks is a set of pre-cut masks for covering the glazing and further surfaces on a model of the American Republic P-43 fighter in 1:72 scale.
In stock
4.76 €
CMKCMK45191:48

1:48 DB-7 Boston Mk.III Ventral & Dorsal Machine Guns for HK Models kits

CMK 1:48 ventral and dorsal machine guns for the DB-7 Boston Mk.III is a 3D-printed resin set with photo-etch that corrects and refines the defensive armament of the model.
In stock
8.76 €
CMKP480511:48

1:48 DB-7 Boston Mk.III Bomb Sight Mk.IX for HK Models kits

A Mk.IX bombsight in 1:48 scale for a model of the DB-7 Boston Mk.III is a tiny detail accessory for a kit, not an aircraft model. The set is cut for the HK Models kit.
In stock
3.56 €
CMKQ722351:72

1:72 Harrier GR.3 Martin-Baker Mk.9 Ejection Seat w/ Harness for Airfix

The resin Martin-Baker Mk.9 ejection seat with harness for the Harrier GR.3 in 1:72 scale from the Czech workshop CMK. It is not an aircraft kit, but a replacement for a simplified cockpit part.
In stock
4.76 €
HasegawaHA025331:72

1:72 Brewster B-239 Buffalo - Finnish Air Force Aces

An injection-molded plastic kit of the Brewster B-239 Buffalo fighter in 1:72 scale from Hasegawa, in a box with Finnish markings.
In stock
21.96 €
Kovozávody ProstějovKPEX0391:72

1:72 Martin Baker CG-A Seat ( for PC-9 )

Kovozavody Prostejov 1:72 Martin-Baker CG-A Ejection Seat is a resin accessory intended for the Pilatus PC-9 model. It is not an aircraft kit — it is a detailed seat replacement that upgrades the cockpit.
In stock
8.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.