SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

1:32 DOUGLAS AD-6 (A-1H) SKYRAIDER

Zoukei-Mura 1:32 Douglas AD-6 (A-1H) Skyraider is an extensive injection-molded plastic kit of the propeller attack aircraft made famous in Vietnam. It contains the complete internal structure and all fifteen hardpoints for armament.

Scale1:32
Manufacturer Zoukei - Mura
Product EAN8591111585941

Responsibility details are not available.

127.96 €
105.75 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Douglas AD-6 (A-1H) Skyraider, 1:32, Zoukei-Mura (the Super Wing Series line)

An injection-molded plastic kit of the Douglas AD-6 (A-1H) Skyraider in 1:32 from the Japanese manufacturer Zoukei-Mura, a modern mold of 2024. The manufacturer states roughly 480 parts. The Super Wing Series line rests on the principle of building an aircraft the way the real one is built: in the box there is not only a shell but also the internal structure, bulkheads, the engine section, fuel tanks, radio equipment and a detailed cockpit. All 15 hardpoints are rendered (one under the fuselage and seven under each wing half). The package includes a masking sheet and decals for four machines of the US Navy. Photo-etch is offered by the manufacturer separately and is not in the basic box.

The real subject

The Skyraider is one of the most interesting stories in the history of aviation: a single-engined propeller attack aircraft that fought in the age of jet fighters. It came about at the very end of the Second World War, but made its name only in Vietnam. It was slow, and that was exactly its greatest strength. It could circle over the battlefield for hours, support ground units precisely and escort rescue helicopters picking up downed crews, which a jet with its fuel consumption could never have managed. Thanks to its powerful radial engine it carried a load of armament greater than many a bomber of the Second World War. The AD-6 version, later redesignated A-1H, was the single-seat attack variant.

Building and painting tips

In 1:32 it is a large model; reckon with room in a display case and on the workbench. It is built in layers: first the inside, then the skin, so paint as you go. It pays to bring out the engine and the cockpit with a wash and dry brushing. Use a thin cement for plastic applied by capillary action and a primer; apply the decals onto gloss varnish. With this manufacturer a build with open panels or an exposed engine section is popular, so that the internal structure can be seen.

Who the model is for

  • For experienced modelers - a large, complex and time-consuming project, not a weekend build
  • For enthusiasts of the air war in Vietnam and of naval support machines
  • For lovers of propeller attack aircraft and radial engines
  • For collectors who have room for a model in 1:32

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Precisely because it was slow. The Skyraider could stay over the battlefield for hours, support ground units precisely and escort rescue helicopters. And it carried an enormous load of armament. A jet with its fuel consumption could have managed none of that.

No. The combination of 1:32, roughly 480 parts and a layered build with a full internal structure makes this kit a long-term project for experienced modelers.

It is a large model in 1:32; check before buying that you have enough room in a display case and on the workbench. The Skyraider had a sizeable wing and the finished model matches it.

No, the basic box contains plastic parts, decals and a masking sheet. Photo-etched sets are offered by the manufacturer separately.

Last seen

Zoukei - MuraSWS231:32

1:32 DOUGLAS AD-6 (A-1H) SKYRAIDER

Zoukei-Mura 1:32 Douglas AD-6 (A-1H) Skyraider is an extensive injection-molded plastic kit of the propeller attack aircraft made famous in Vietnam. It contains the complete internal structure and all fifteen hardpoints for armament.
In stock
127.96 €
BrengunBRL1442001:144

1:144 KC-130J - Refueling Pod (2 pcs)

A pair of refueling pods for the four-engine Hercules in the rendition for the navy. Cast parts in 1:144 scale that will replace the simplified shapes from a kit.
In stock
6.36 €
PANZER ARTSU35-0281:35

1:35 WWII US 76mm tank destroyers and tank gun ammo

A set of 76 mm ammunition for American tanks and tank destroyers, cast in a silicone mold. 1:35 scale.
In stock
9.56 €
Quinta StudioQD483041:48

1:48 Harrier Gr.3 late 3D-Printed & coloured Interior on decal paper (Kinetic)

Quinta Studio Harrier Gr.3 late 3D interior 1:48 is a 3D printed colored cockpit set on decal paper for late Harrier GR.3 models. Relief detail with no painting. Target kit: Kinetic.
In stock
18.76 €
French SNCF Locomotives-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIGR-1016

French SNCF Locomotives

French SNCF Locomotives is a set of modeling paints by AMMO of Mig Jimenez from the range for railroad modelers, aimed at the colors of French SNCF locomotives.
2 left
17.16 €12.88 € You save 4.28 €
KajikaKM710221:700

1:700 IJN Haruna Battlecruiser 1915 Name Plate (For KM70003)

A nameplate for a model of the Japanese battlecruiser Haruna in her 1915 state in 1:700 scale by the manufacturer Kajika. It is not a model of the ship but an accessory for displaying her.
In stock
11.16 €
BANON DESIGNBAN504-19

BAN504 round spherical rivet 1,9mm

A rivet head 1.9 mm in diameter, one of the extreme dimensions of the family with a full round dome.
In stock
10.36 €
Aires/QuickboostQB490931:48

1:48 Fairchild A-10A/A-10C Opened in-flight refueling slipway door - late

Slipway door for in-flight refueling on the A-10, late version 1:48 offers the cover in the nose of the fuselage in the open position. The item supplements a kit of the ground-attack aircraft already bought.
In stock
6.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.