Abrasive paper for modelers in 180 grit from the MSP line. A coarser grit for the first leveling of joints and for removing excess material.
Responsibility details are not available.
The number on abrasive paper gives the coarseness of the grain: the higher the number, the finer the surface left after sanding. 180 grit is among the coarser grades and is used at the start of the work, where material needs to be taken off quickly. Typically that means leveling a glued joint on a fuselage, sanding away excess material and marks left by manufacture, or roughly shaping a part that is being reworked. On its own it is not enough to finish a surface; it is the first step of several.
This is abrasive paper from the MSP modeling line in a single grade, 180 grit. It suits the building of plastic models as well as work on accessories and can be used on flat surfaces and for rounding off edges.
On flat surfaces back the paper with a hard block, otherwise the surface will ripple. Sand in one direction and rather for longer with light pressure than briefly with force, because a coarse grain bites easily into soft plastic. After 180 grit carry on through progressively finer grades and do not skip a large step, otherwise deep scratches will stay visible even under the clear coat. Between steps wipe the surface and check it in strong side light, where the scratches show up best. Before you start wet sanding, check with the manufacturer whether the paper is intended for use with water. Before painting, wash off the dust and degrease the surface.
For anyone who builds plastic models and needs to handle the coarser stage of surface preparation. Paints, filler and the finer sanding grades are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!