A resin radome nose section for the Beaufighter in 1:48 from the Czech maker AML. An accessory for the night fighter versions, which carried a radar under a radome in the nose of the fuselage.
Responsibility details are not available.
A resin accessory from the Czech maker AML for the Bristol Beaufighter in 1:48 scale. It replaces the nose section of the fuselage so that it matches the night fighter versions with a radome. The casting has a fine surface and, once the casting block is cut off, it is glued straight onto the plastic kit. The set is cut for the Beaufighter model from Tamiya.
The Bristol Beaufighter grew out of the Beaufort torpedo bomber and became one of the most successful British night fighters. It was powered by two Bristol Hercules radial engines and carried exceptionally heavy armament in the nose and in the wing. It was the night fighters that received a radar in the nose; the late versions had its antenna hidden under a radome, so they are easy to recognize head-on.
First wash the part in lukewarm water with detergent to clear it of the remains of the mold release agent. Cut the casting block off with a saw, not with cutters, and level the surface on sandpaper laid on glass. It is glued with cyanoacrylate glue. Fill and sand the joint against the plastic, and only then spray the primer. Work with respiratory protection when sanding resin.
The set is an accessory for a kit and does not replace the kit. Paints, glue and the model are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
