1:48 Canopy and wheel hub masks for Mikoyan MiG-31BM Foxhound kit. (AMK)

1:48 Canopy and wheel hub masks for Mikoyan MiG-31BM Foxhound kit. (AMK)

8.76 €
Add to Cart

1:48 Canopy and wheel hub masks for Mikoyan MiG-31BM Foxhound kit. (AMK)

1:48 Mikoyan MiG-31BM Foxhound — masks for the glazing and wheel hubs is a self-adhesive masking set from Furball Aero-Design. It is an accessory for a plastic kit of this type in 1:48 scale, not the model itself. Intended for the AMK kit.

Scale1:48
Manufacturer Furball Aero-Design
Product EAN8591111000000

Responsibility details are not available.

8.76 €
7.24 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A masking set for the MiG-31BM in 1:48 scale

The set holds pre-cut self-adhesive masks for the cockpit glazing and for the wheel hubs. The package holds no plastic parts and no decals — it is intended for modelers who already have a MiG-31 kit in 1:48 scale and want to save themselves the slowest part of painting. The cut of the masks matches the glazing of the AMK kit, so the set is not universal.

The real subject

The MiG-31 is a two-seat supersonic interceptor with a long range, which structurally followed on from an earlier high-speed type from the same design bureau. It has a tandem cockpit for a pilot and a weapon systems operator and is built for long patrol flights at high altitude. The designation BM belongs to the modernized version with reworked avionics and a widened range of usable armament.

How to apply masks to a two-seat cockpit

A long two-part canopy is precisely the case where hand masking with tape takes an evening and still does not come out symmetrical. Work pane by pane: lift the mask with a scalpel, lay it in the middle of the pane and only then press it down from the center toward the edges with a soft tool, so that no fold forms anywhere. On strongly domed parts it helps to warm the glazing slightly with a hairdryer — not the mask, only the glass. Spray the paint in thin coats; the first coat should be the interior color, so that the frames do not show through. Take the mask off while the finish is fresh, and clean up any overrun with a toothpick, not with a metal point.

Who the set is for

  • Modelers building the MiG-31 in 1:48 scale
  • Those who do not want to mask a long two-seat canopy by hand
  • Builders who care about the frames being the same width on both sides
  • Modelers who want the wheel hubs cleanly separated from the tires

An add-on set, not a kit. The AMK base kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, it holds a masking sheet only. The MiG-31 kit in 1:48 scale has to be obtained separately.

It is the modernized version of the MiG-31 with reworked avionics and widened armament.

No. The masks are cut to the glazing of the AMK kit in this scale, so verify that you have the matching model.

According to the name, the contents are masks for the glazing and the wheel hubs. Any further elements are not stated here.

Last seen

Furball Aero-DesignFMS0231:48

1:48 Canopy and wheel hub masks for Mikoyan MiG-31BM Foxhound kit. (AMK)

1:48 Mikoyan MiG-31BM Foxhound — masks for the glazing and wheel hubs is a self-adhesive masking set from Furball Aero-Design. It is an accessory for a plastic kit of this type in 1:48 scale, not the model itself. Intended for the AMK kit.
In stock
8.76 €
VallejoVAL71607

Air War Color Series - Soviet/Russian Colors MiG-21 Fishbed from 50s to 90s

A set of Vallejo model paints from the Air War Color Series line, put together for the Soviet and Russian finishes of the MiG-21 fighter from the 1950s to the 1990s.
In stock
25.96 €
TamiyaTA241251:24

1:24 Toyota Celica Castrol GT-Four '93 Monte-Carlo Rally Winner

An injection-molded plastic kit of the Toyota Celica GT-Four Castrol '93 in 1:24 scale from Tamiya - the winning rally car of the 1993 Monte Carlo Rally in Castrol colors.
In stock
26.76 €
Art ScaleASKM321011:32

1:32 F4U-1 Corsair Birdcage double-sided express fit mask for Tamiya

The masking set 1:32 F4U-1 Corsair Birdcage double-sided express fit mask for spraying the frames of the early greenhouse canopy of the Vought F4U-1 in a large scale. The templates are cut for the Tamiya kit.
In stock
10.36 €
Plastruct PLT90661

Stair Styren N (1 pcs) H-2,4mm W-5,6mm L-75mm (1:200)

Plastruct styrene stairs N H-2.4 mm W-5.6 mm L-75 mm are a styrene staircase part for mock-ups and dioramas, recommended scale 1:200.
In stock
2.20 €
MASTERSM7000011:700

1:700 German 38cm (15in) SKC/34 barrels (8pcs) - Bismarck, Tirpitz

Turned brass barrels for the German 38 cm SK C/34 naval gun in 1:700 scale from MASTER. Accurate metal barrels (8 pieces) for the battleships Bismarck and Tirpitz; a detail accessory, not a kit.
In stock
4.76 €
AoshimaAO056431:24

1:24 Toyota JZX90 Mark II Grande / Tourer '92

Toyota JZX90 Mark II Grande and Tourer is a plastic kit of a Japanese sedan of the early 1990s in 1:24 from the manufacturer Aoshima.
In stock
25.96 €
Quinta StudioQD240191:24

1:24 Porsche 911 Turbo (930) 3D-Printed & coloured Interior on decal paper (Tamiya)

Porsche 911 Turbo (930) interior, 3D decals (1:24) from Quinta Studio are colored 3D decals for the interior that slide off the carrier paper onto the model after a short soak. Intended for the Tamiya kit.
In stock
14.76 €
BrengunBRL721581:72

1:72 Ohka MXY7-K1 KAI (two seat) vacu canopy (Brengun kit)

The Brengun 1:72 vacuum-formed clear canopy for the two-seat Ohka MXY7-K1 KAI is noticeably thinner and cleaner than the usual injection-molded part.
In stock
5.56 €
Quinta StudioQD484311:48

1:48 Westland Sea King HU.5 3D-Printed & coloured Interior on decal paper (Airfix)

Quinta Studio 1:48 Westland Sea King HU.5 3D interior decal gives the cabin of the helicopter three-dimensional, pre-colored detail applied wet like a decal. Intended for the Airfix kit.
In stock
25.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.