1:24 Toyota Celica Castrol GT-Four '93 Monte-Carlo Rally Winner

1:24 Toyota Celica Castrol GT-Four '93 Monte-Carlo Rally Winner

26.76 €
Add to Cart

1:24 Toyota Celica Castrol GT-Four '93 Monte-Carlo Rally Winner

An injection-molded plastic kit of the Toyota Celica GT-Four Castrol '93 in 1:24 scale from Tamiya - the winning rally car of the 1993 Monte Carlo Rally in Castrol colors.

Scale1:24
Manufacturer Tamiya
Product EAN8591111241250

Responsibility details are not available.

26.76 €
22.12 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Toyota Celica GT-Four Castrol '93 (1:24, Tamiya)

This injection-molded plastic kit in 1:24 scale from the Japanese company Tamiya captures the works rally car Toyota Celica GT-Four (the ST185 type) in the configuration of the winner of the 1993 Monte Carlo Rally in the team's Castrol colors. The model faithfully conveys the car's tarmac rally stance, the mesh screens in the bumper, the underbody air channels and a well-worked interior with a roll cage and sports seats. Additional long-range driving lights for night stages and decals for the works Toyota Team Europe cars are enclosed.

The real subject

The Toyota Celica GT-Four ST185 was one of the most successful Group A cars in the World Rally Championship of the early 1990s. It was powered by a two-liter turbocharged inline four-cylinder engine with all-wheel drive. In 1993 the works team fought for the title with it against Lancia, Ford, Subaru and Mitsubishi, and at the opening Monte Carlo Rally it managed to win.

Building and painting tips

Glue the parts with thin cement for plastic. Build the white base of the body over primer and paint it with an airbrush - pure white is demanding in terms of coverage, so choose thin covering coats. Apply the striking Castrol livery decals over a perfectly glossy base so that the large decals do not wrinkle; then seal them with clear varnish. Finish the bumper mesh, the roll cage and the additional lights only after varnishing. Glue the glazing and the lights with glue for clear parts.

Who the model is for

  • For fans of rallying and of Group A
  • For collectors of the Toyota brand and of the Castrol team
  • For modelers with experience of large-area livery decals
  • For builders of 1:24 scale competition cars

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

5,0/5 ★★★★★★★★★★ from 1 ratings
5★1×
4★0×
3★0×
2★0×
1★0×
Petr V. 5. 3. 2026 ★★★★★

Kvalitně zpracovaná stavebnice, doporučuji.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is the works Celica GT-Four of the ST185 type in Castrol colors as the winner of the 1993 Monte Carlo Rally. It contains decals for the Toyota Team Europe cars.

Yes, the model contains the parts of the additional long-range driving lights for night stages, as well as the bumper mesh and an interior with a roll cage.

Apply the large decals over a perfectly glossy base so that they do not wrinkle and no bubbles form. Once they are dry, go over them with clear varnish to unify the surface.

Last seen

TamiyaTA241251:24

1:24 Toyota Celica Castrol GT-Four '93 Monte-Carlo Rally Winner

An injection-molded plastic kit of the Toyota Celica GT-Four Castrol '93 in 1:24 scale from Tamiya - the winning rally car of the 1993 Monte Carlo Rally in Castrol colors.
In stock
26.76 €
Art ScaleASKM321011:32

1:32 F4U-1 Corsair Birdcage double-sided express fit mask for Tamiya

The masking set 1:32 F4U-1 Corsair Birdcage double-sided express fit mask for spraying the frames of the early greenhouse canopy of the Vought F4U-1 in a large scale. The templates are cut for the Tamiya kit.
In stock
10.36 €
Plastruct PLT90661

Stair Styren N (1 pcs) H-2,4mm W-5,6mm L-75mm (1:200)

Plastruct styrene stairs N H-2.4 mm W-5.6 mm L-75 mm are a styrene staircase part for mock-ups and dioramas, recommended scale 1:200.
In stock
2.20 €
MASTERSM7000011:700

1:700 German 38cm (15in) SKC/34 barrels (8pcs) - Bismarck, Tirpitz

Turned brass barrels for the German 38 cm SK C/34 naval gun in 1:700 scale from MASTER. Accurate metal barrels (8 pieces) for the battleships Bismarck and Tirpitz; a detail accessory, not a kit.
In stock
4.76 €
AoshimaAO056431:24

1:24 Toyota JZX90 Mark II Grande / Tourer '92

Toyota JZX90 Mark II Grande and Tourer is a plastic kit of a Japanese sedan of the early 1990s in 1:24 from the manufacturer Aoshima.
In stock
25.96 €
Quinta StudioQD240191:24

1:24 Porsche 911 Turbo (930) 3D-Printed & coloured Interior on decal paper (Tamiya)

Porsche 911 Turbo (930) interior, 3D decals (1:24) from Quinta Studio are colored 3D decals for the interior that slide off the carrier paper onto the model after a short soak. Intended for the Tamiya kit.
In stock
14.76 €
BrengunBRL721581:72

1:72 Ohka MXY7-K1 KAI (two seat) vacu canopy (Brengun kit)

The Brengun 1:72 vacuum-formed clear canopy for the two-seat Ohka MXY7-K1 KAI is noticeably thinner and cleaner than the usual injection-molded part.
In stock
5.56 €
Quinta StudioQD484311:48

1:48 Westland Sea King HU.5 3D-Printed & coloured Interior on decal paper (Airfix)

Quinta Studio 1:48 Westland Sea King HU.5 3D interior decal gives the cabin of the helicopter three-dimensional, pre-colored detail applied wet like a decal. Intended for the Airfix kit.
In stock
25.56 €
PeewitPWM1420081:144

1:144 PSP - Grass-size of the field 7,3 x 7,3 cm

A printed base for models in 1:144 scale from Peewit with a printed area of 7.3x7.3 cm showing a field airstrip of perforated steel planking and a grass edge.
In stock
2.76 €
Artwox ModelAW100891:350

1:350 HMS New Zealand Wooden Deck (for Combrig kit 3532)

A 1:350 wooden deck for the British battlecruiser HMS New Zealand is an adhesive veneer set with pre-printed plank laying for a plastic kit.
In stock
21.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.