1:48 Dornier Do-217J-1/2 undercarriage

1:48 Dornier Do-217J-1/2 undercarriage is an Eduard photo-etched set aimed at the landing gear of a model in 1:48 scale. These are metal parts to be glued into the model, not a mask, decals or a kit.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

20.80 €
17.19 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:48 Dornier Do-217J-1/2 undercarriage — an Eduard photo-etched set

The item belongs to the line of photo-etched detail sets of Eduard and according to its name it concentrates on the landing gear. It differs from the masking sets of the same manufacturer in that it covers nothing but adds: thin brass parts are glued into the model and stay there. From the pre-painted sets of the Zoom line, which aim mainly at the cockpit and arrive finished in color, it differs both in focus and in the fact that you will paint the sheet yourself. Do not confuse it with the Brassin resin line or with decals; these are flat metal parts.

What the set is good for on a model

The landing gear and the gear bays are among the places on aircraft models where simplification shows most. In reality there is a dense tangle of thin struts, rods, hoses and sheet covers there, which an injection mold cannot capture finely enough. Photo-etched sheet measuring tenths of a millimeter is far closer to scale for such features. On a twin-engine aircraft the gear bays are moreover large and easy to look into when the model is displayed.

Building tips

Cut the parts off with a sharp scalpel on a hard surface, otherwise the sheet will bend. Degrease it with alcohol before gluing. The struts and rods are long and narrow, so it is advisable to hold them with tweezers at both ends and bend them slowly; briefly anneal harder sheet over a flame beforehand. They are bonded with super glue applied on the tip of a piece of wire, and the gel type holds longer and gives time to adjust the position. Paint the landing gear with a primer for metal before assembly and pick out the finished assembly with a dark wash, which flows between the struts and brings out the depth.

Who the set is for

  • modelers with experience of photo-etched parts
  • builders of twin-engine aircraft in 1:48 scale
  • those who display their models and want faithful gear bays
  • anyone interested in the maximum of detail in an exposed place

This is an accessory to a model, not a kit. The model, paints, primer and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a photo-etched detail set for the landing gear. The model itself is obtained separately.

Photo-etched metal parts for the landing gear area. The number of parts is stated on the box of the set.

The sheet is strong in tension but takes bending less well. Leave the load-bearing function to the plastic or metal struts of the kit and use the etch for the details.

Best of all after degreasing and priming, before the final assembly; afterwards the small surfaces are hard to reach.

Last seen

EduardED4810271:48

1:48 Dornier Do-217J-1/2 undercarriage

1:48 Dornier Do-217J-1/2 undercarriage is an Eduard photo-etched set aimed at the landing gear of a model in 1:48 scale. These are metal parts to be glued into the model, not a mask, decals or a kit.
In stock
20.80 €
VallejoVALB06004

Brush - Shader - Filbert Synthetic No. 4

Vallejo Brush Shader Filbert Synthetic No. 4 is a synthetic brush with a filbert (rounded flat) shape from the Shader range, meant for shading and for applying glazes and filters.
In stock
3.56 €
BroncoNB50091:350

1:350 German Long Range Submarine U-IXB

Bronco 1:350 German Long Range Submarine U-IXB is a plastic kit of the German ocean-going Type IXB submarine of the Second World War.
In stock
10.76 €
Kits-WorldKW1440051:144

1:144 Avro Lancaster Bomber

A set of waterslide decals in 1:144 for four named Lancasters of Canadian and British Bomber Command squadrons, including code letters.
In stock
9.16 €
EduardED6350061:35

1:35 Ammo belts 12,7 mm

Eduard Brassin 1:35 ammo belts 12.7 mm is a resin detail set of ammunition belts in 12.7 mm caliber (.50 cal) for military models and dioramas in 1:35 scale.
In stock
6.80 €
OmaskOMKX48151:48

1:48 P-47D Thunderbolt O-max set (for Miniart)

Omask O-max set 1:48 P-47D Thunderbolt (for MiniArt) is a complete masking package for building this model - more than just canopy masks: it holds a masking set as well as foam plugs for the landing gear bays. This is an accessory, not a model.
In stock
8.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.