1:48 Dornier Do 335B Wheels for TAM

A resin wheel set for the Dornier Do 335 in 1:48 scale from the Czech manufacturer CMK replaces the injection-molded plastic parts with castings with sharper tread and hub definition.

Scale1:48
Manufacturer CMK
Product EAN8591111328838

Responsibility details are not available.

3.16 €
2.61 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Dornier Do 335 wheels in 1:48 scale from CMK

This is a resin accessory, not an aircraft kit. The set is intended for exchanging the landing gear wheels of an injection-molded Do 335 model in 1:48 scale for castings with finer tread definition and hub shaping than a split plastic mold allows. The basic kit has to be obtained separately.

The real subject

The Dornier Do 335 was a German twin-engine aircraft of the end of the Second World War with an unusual tandem engine arrangement. One engine drove a tractor propeller in the nose, the other was housed in the rear of the fuselage and drove a pusher propeller through a long shaft. The arrangement reduced frontal drag compared with the classic twin-engine solution with engines in the wing and allowed a relatively high speed. The aircraft had nosewheel landing gear, which was rather exceptional on German machines of this class at the time. The variants of the B series were derived from the airframe of the A series and prepared as a heavily armed fighter type. Only a small number of machines were built before the end of the war and their combat use was negligible.

Usage and painting tips

Wash the castings in lukewarm soapy water before building; otherwise the mold release residue keeps the paint from adhering. Cut the casting blocks off with a fine saw and level the surface with abrasive paper; sand resin wet and protect your airways. They are glued with cyanoacrylate glue; ordinary cement for plastic does not hold on resin. Do not spray the tire pure black; a dark gray shade with a sooty cast looks more faithful at scale. Set the hub apart separately and bring out the transition between hub and tire with a dark wash; a light dusting of pigment can then go on the tread.

Who the set is for

  • modelers for whom the simplified wheels from the box are not enough
  • builders of German aviation subjects in 1:48 scale
  • anyone after a quick improvement with a clearly visible result
  • modelers with basic experience of working with resin

This is an accessory for modelers, not a kit in its own right. The basic model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a resin accessory, specifically replacement landing gear wheels. The aircraft kit itself in 1:48 scale has to be bought separately.

Cyanoacrylate glue. Cement for plastic does not soften resin and the joint would not hold.

Yes, wash them in lukewarm soapy water and let them dry. That removes the mold release residue, on which paint would hold poorly.

Last seen

CMKQ481151:48

1:48 Dornier Do 335B Wheels for TAM

A resin wheel set for the Dornier Do 335 in 1:48 scale from the Czech manufacturer CMK replaces the injection-molded plastic parts with castings with sharper tread and hub definition.
In stock
3.16 €
E.T. ModelER35-0541:35

1:35 Russian GAZ-233014 STS

In stock
23.96 €
1:350 CVN-65 Enterprise PART II-25 %Stock ClearanceFavorite
EduardBIG53521:350

1:350 CVN-65 Enterprise PART II

Last one!of 3
76 €57 € You save 19 €
Hobby BossHB872011:72

1:72 A-7A Corsair II

1:72 A-7A Corsair II is a plastic kit of the first production version of the American carrier-based attack aircraft, in 1:72 scale, by Hobby Boss.
In stock
17.96 €
AK interactiveAK11913

A-19F GRASS GREEN – AIR

AK A-19F Grass Green AIR is a third-generation water-thinnable acrylic paint for the airbrush, a grass green aviation shade.
In stock
2.76 €
Royal ModelRM5621:35

1:35 Katiusha rockets

In stock
15.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.