20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:48 EA-18G TFace

Eduard 1:48 EA-18G TFace is a set of cut masks that masks the cockpit of an EA-18G Growler model from inside as well as from outside. It is not a model but an accessory to a kit.

Scale1:48
Manufacturer Eduard
Product EAN8541111062859

Responsibility details are not available.

9 € 6.76 €
5.59 € without VAT
−25 % You save 2.24 €
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard 1:48 EA-18G TFace, double-sided masking sets

This is not an aircraft kit but an accessory to one. The Czech manufacturer Eduard, from Obrnice near Most, cuts the masks out of kabuki tape, that is a thin paper material with a mild adhesive that takes to curved glazing and comes off without residue after spraying. The TFace designation means that the set covers masking from both sides: one part of the mask is stuck on the outer surface of the glazing, the other from inside. The cockpit frame can then be sprayed from the inner side as well in the right interior shade, and when you look into the cockpit no transparent strip of unpainted plastic is left.

The real subject

The EA-18G Growler is a two-seat carrier-borne electronic warfare aircraft of the US Navy derived from the airframe of the F/A-18F Super Hornet strike fighter. It entered service in the late 2000s as a replacement for the older EA-6B. Its task is jamming and suppressing air defenses. The cockpit is a two-seater with extensive glazing and broken-up framing, so double-sided masking pays off most of all on this type.

Use and tips

  • Stick the inner parts of the masks on first, and only then polish the canopy and stick the outer masks down.
  • Degrease the surface and press the masks down with a toothpick, so that no paint creeps under the edge.
  • Spray thin coats and let the paint dry between them.
  • Lift the masks off soon after the paint has dried, because the adhesive hardens over time.
  • Glue the glazing to the fuselage with a glue for canopies, never with a thin liquid cement for plastic, which fogs the material.

Who the set is for

For modelers who build the Growler in 1:48 and want the cockpit frame faithful when seen from inside as well. Eduard also runs basic masks for the same type without the TFace designation, which mask only from outside: they are two different levels of the set. Under the same name there are further kinds of accessory as well, that is a pre-painted Zoom set, a full photo-etched set or a decal set; they are told apart by the exact designation of the line with each particular item.

The set holds masking material only. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

That the set holds masks for both sides of the glazing. The cockpit frame can then be sprayed from inside as well in the interior shade, and when you look into the cockpit no transparent strip is left.

The set without TFace masks only from the outer side, while this one covers both sides. They are two different levels of the product.

It is not. It is a masking set, that is an accessory to a kit. The model has to be bought separately.

The masks are cut to the outline of a particular kit, so check that detail on the packaging.

Last seen

1:48 EA-18G TFace-25 %Stock ClearanceFavorite
EduardEX8771:48

1:48 EA-18G TFace

Eduard 1:48 EA-18G TFace is a set of cut masks that masks the cockpit of an EA-18G Growler model from inside as well as from outside. It is not a model but an accessory to a kit.
Last one!of 3
9 €6.76 € You save 2.24 €
1:48 SBD-3 Dauntless
-20 %
Favorite
EduardFE2841:48

1:48 SBD-3 Dauntless

The Eduard SBD-3 Dauntless 1:48 is a color self-adhesive photo-etched set for detailing the cockpit of a model of the American SBD-3 Dauntless carrier dive bomber.
In stock
6.80 €5.44 € You save 1.36 €
1:48 Su-27 wheels
-20 %
Favorite
EduardED6486531:48

1:48 Su-27 wheels

Wheels for the Su-27, 1:48 (Eduard Brassin) is a resin detail set of landing gear wheels with faithful tread and realistic loading of the tires.
In stock
6.80 €5.44 € You save 1.36 €
1:72 Buccaneer S.2C-25 %Stock ClearanceFavorite
EduardSS6941:72

1:72 Buccaneer S.2C

Photo-etched detail set for a model of the Buccaneer S.2C in 1:72 scale. Thin metal parts replace plastic shapes that cannot be made fine enough in a mold.
Last one!of 5
9 €6.76 € You save 2.24 €
DESERT OCHRE – PLAYMARKER
-20 %
Favorite
AK interactiveAKM021

DESERT OCHRE – PLAYMARKER

A Playmarker modeling marker pen in a desert ocher shade. The muted sand tone is applied straight from the tip, with no brush and no mixing.
In stock
2.76 €2.21 € You save 0.55 €
DUNKELGELB BASE
-20 %
Favorite
AMMO of Mig JimenezA.MIG-0902

DUNKELGELB BASE

DUNKELGELB BASE is an acrylic modeling paint from AMMO of Mig Jimenez. The base dark yellow Dunkelgelb shade for modulating German equipment of the Second World War.
In stock
3 €2.40 € You save 0.60 €
Burnt Umber 17ml
-20 %
Favorite
AK interactiveAK11111

Burnt Umber 17ml

AK 3rd Generation Acrylics Burnt Umber, 17 ml is a water-thinnable acrylic paint with a flat finish in the tone of burnt umber.
In stock
2.76 €2.21 € You save 0.55 €
1:32 MiG-29A
-20 %
Favorite
EduardJX2041:32

1:32 MiG-29A

Eduard MiG-29A masks 1:32 is a die-cut self-adhesive masking set for a model of the Soviet MiG-29A fighter. It gives crisp color transitions on the glazing, the wheels and the camouflage. It is not a model but a masking aid.
In stock
9 €7.20 € You save 1.80 €
Basalt Grey 17ml
-20 %
Favorite
AK interactiveAK11021

Basalt Grey 17ml

AK interactive Basalt Grey 17 ml is a 3rd generation water-thinnable acrylic paint in a dark basalt gray with a matte surface.
In stock
2.76 €2.21 € You save 0.55 €
1:72 Buccaneer S.2B-25 %Stock ClearanceFavorite
EduardCX2801:72

1:72 Buccaneer S.2B

Eduard 1:72 masks Buccaneer S.2B are precisely shaped painting masks for clean spraying of the glazing and the wheels, not a model.
2 leftof 12
5.20 €3.92 € You save 1.28 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.