1:48 F-4E/EJ/F/G/J/S Phantom II exhaust nozzles

Resin engine exhaust nozzles for the Phantom II in the E, EJ, F, G, J and S versions in 1:48 scale are a detail accessory from Aires. It is not a model of an aircraft but replacement parts for a kit.

Scale1:48
Manufacturer Aires
Product EAN8591111000000

Responsibility details are not available.

34 €
28.10 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Phantom II E / EJ / F / G / J / S, resin nozzles 1:48

A set of resin engine exhaust nozzles for models of the Phantom II in the E, EJ, F, G, J and S versions in 1:48 scale from the Czech manufacturer Aires. It is not a kit or a model of an aircraft; these are detail parts with which the simplified plastic nozzles on a model are replaced. The Phantom has two engines, so the set covers both nozzles. The exact number of parts and the contents of the package are stated on the box.

What the set is for

The exhaust nozzles of the Phantom are a typical place where injection-molded plastic runs into the limits of its technology: the wall is thick, the inside has no ribbing and a parting seam runs the whole length, which cannot be sanded away comfortably. Resin castings have a thin edge, a full internal structure and the segments of the nozzle cast in one piece. Once painted in metallic and burnt shades, the tail of the model becomes one of the most striking details of the whole build.

The real subject

The Phantom II is a two-seat twin-engine supersonic combat aircraft that served from the 1960s in a number of countries and in many specialized versions, from fighters and fighter-bombers to variants for the suppression of air defenses. The individual versions differed in equipment, radar, armament and in some cases in the type of engine, which carried over into the shape of the rear fuselage and of the nozzles.

Usage and painting tips

First wash the castings in lukewarm soapy water so that the mold release agent disappears. Cut the casting blocks off with a razor saw and level the surface on wet sandpaper; protect your airways while sanding resin. It is glued with cyanoacrylate glue (super glue). Before gluing it in, dry-fit how the nozzles sit into the tail of the fuselage and correct any overhang by sanding the fuselage, not the casting. They are painted in metallic shades with a transition into burnt tones at the trailing edge; soot goes on as the very last layer.

Who the set is for

  • Builders of Phantoms in 1:48 scale who want an accurate rear fuselage
  • Modelers moving from out-of-the-box building to added detailing
  • More experienced modelers, as resin calls for cutting, sanding and cyanoacrylate glue
  • Those who display models in a cabinet with the tail in view

The accessory is supplied unpainted. Paints, glue and the base kit are not included in the package. We recommend checking that it matches your kit before buying.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a resin detail accessory, replacement engine exhaust nozzles that are glued into a plastic Phantom kit.

The Phantom is twin-engined and the set is, according to the name, intended for nozzles in the plural. The exact number of parts is stated on the box.

According to the name, for the E, EJ, F, G, J and S versions. We recommend checking that it matches your particular kit against the data on the box of the set.

In metallic shades with a transition into burnt tones toward the trailing edge. Sooty weathering goes on as the last layer.

Last seen

AiresAIR48531:48

1:48 F-4E/EJ/F/G/J/S Phantom II exhaust nozzles

Resin engine exhaust nozzles for the Phantom II in the E, EJ, F, G, J and S versions in 1:48 scale are a detail accessory from Aires. It is not a model of an aircraft but replacement parts for a kit.
In stock
34 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.