1:48 Grumman F-14A Tomcat TFace

1:48 Grumman F-14A Tomcat TFace is a two-sided set of glazing masks in kabuki paper for a model of the carrier fighter in 1:48 scale from Eduard.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

12.40 €
10.25 € without VAT
4 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

TFace masks for the F-14A Tomcat 1:48 (Eduard)

A set of die-cut self-adhesive masks in kabuki paper for a model of the F-14A Tomcat carrier fighter in 1:48 scale from the Czech maker Eduard. The designation TFace means that the set contains masks not only for the outer but also for the inner side of the glazing. With the large canopy of this type that makes practical sense: with the cockpit open the frames are visible from inside as well as outside, and masking the outside alone would leave the inner side of the frames in the color of the transparent plastic. The set is die-cut to the shape of the glazing of a particular kit and need not fit a model from another maker.

The real subject

The F-14A was a two-seat carrier fighter with a variable-geometry wing, two engines and a crew of a pilot and a weapon systems officer. It served to defend carrier groups and carried a radar with a range that let it fight at long distance. The wing adjusted itself automatically in flight according to speed, and when parked it folded back to save room on the deck. The large sliding canopy with good visibility is among its hallmarks and is the main reason it pays to mask the glazing from inside on this type.

Usage tips

Stick the inner masks on before closing the cockpit up; once the parts are cemented together you cannot reach inside. Degrease the glazing beforehand. Place the masks with tweezers and press them down along the whole perimeter; on long straight edges work from the center toward the ends, so that the paper does not wrinkle. Spray the inner side of the frames in the interior color and then the outer side in the base shade of the airframe. Apply the paint thinly; on large areas of glazing a heavy layer readily crumbles at the edge of the mask. Remove the masks shortly after the paint has dried.

Who the set is for

  • modelers building carrier aircraft in 1:48 scale
  • a build with an open cockpit, where the inner side of the frames is visible
  • modelers who want a sharp transition between the glazing and the airframe
  • a competition build, where the cockpit is judged from close up

The set is an aid for painting. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

That the set contains masks for both sides of the glazing, that is, for the inner side of the frames as well. With an open cockpit that side is visible and without masking it would stay in the color of the transparent plastic.

Before closing the cockpit up and cementing the fuselage. Once it is assembled you can no longer reach the inner side of the glazing.

It is not. It is a masking set; the kit has to be bought separately.

They need not. The die cut matches the shape of the glazing of a particular kit.

Last seen

EduardEX7301:48

1:48 Grumman F-14A Tomcat TFace

1:48 Grumman F-14A Tomcat TFace is a two-sided set of glazing masks in kabuki paper for a model of the carrier fighter in 1:48 scale from Eduard.
In stock
12.40 €
Yahu ModelsYML48031:48

1:48 I.A.R. 80 early

Yahu Models 1:48 I.A.R. 80 early instrument panel is a colored photo-etched instrument panel for the model of the early standard of this Romanian fighter. It is an accessory that sharpens the cockpit, not a model of the aircraft.
In stock
8.76 €
Aires/AerobonusAER3200471:32

1:32 35Lb. lubricating bucket pump USAF

The 35 lb. lubricating bucket pump USAF 1:32 from Aerobonus (Aires) — a resin accessory of airfield ground support equipment: a bucket lubricating pump of 35 pounds in USAF markings.
In stock
6 €
Carbon Finish 20 Fine Meshes-25 %Stock ClearanceFavorite
HasegawaHATF9

Carbon Finish 20 Fine Meshes

Hasegawa Carbon Finish with a fine weave — a self-adhesive foil with a very fine structure of carbon fabric for hoods, interiors and aerodynamic elements of models.
2 left
14.36 €10.76 € You save 3.60 €
Model MakerMM-D480441:48

1:48 Asian Fulcrums part 1

Asian Fulcrums part 1 1:48 is a decal set in 1:48 scale aimed at the machines of the Fulcrum family among Asian users.
In stock
11.16 €
Aires/QuickboostQB480211:48

1:48 MiG-21MF air cooling scoops

Resin cooling air scoops for the MiG-21MF in 1:48 scale from Quickboost — a detail accessory for the fuselage; it is not an aircraft model.
In stock
4.76 €
HGWHGW5320421:32

1:32 4 Colour Lozenge - Canvas texture

A decal sheet with a four-color diamond lozenge pattern and a canvas texture for models of German First World War aircraft in 1:32 scale. It is a wet transfer.
In stock
10.04 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.