Resin wheels and paint masks for the I-16 in 1:48 scale from the Czech maker Aires. An accessory for replacing the wheels out of the box, not a kit of the aircraft.
Responsibility details are not available.
An add-on set in cast resin for building the Polikarpov I-16 in 1:48 scale. It replaces the main landing gear wheels with castings carrying a finer drawing of the tread and the hub and adds masks which simplify the painting of the boundary between the tire and the hub. The aircraft is not included in the package; the set is fitted into a kit that has already been bought.
The I-16 was a single-engine fighter with retractable landing gear and a short barrel-shaped fuselage, typical for its radial engine and small span. The landing gear wheels with their domed hub caps are among its distinctive recognition features, and on a model they are clearly visible both in the retracted and in the extended position.
First wash the castings in warm water with dish soap; the residue of the mold release agent is the most common cause of paint peeling. Cut the casting block off with a saw at the place where the landing gear fork will cover the surface anyway. Before gluing, try dry whether the wheel sits on the axle, and widen the hole with a small drill if need be. Paint in the order hub, mask, tire, and reach for a very dark gray instead of black on the tire; it looks more natural in scale. Finally a light cast of dust pigment on the tread helps, so that the wheel does not look as if it were new from a tire shop.
This is an accessory to a build, not a complete model. The base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!