1:48 Ju 88A-4

Eduard 1:48 Ju 88A-4 masks

A set of self-adhesive die-cut masks from Eduard in 1:48 scale, meant for spraying the framing of the cockpit glazing and the other transparent areas of the German twin-engine Ju 88A-4 bomber accurately. It is not a kit or an aircraft model but an accessory to a kit you already have. The masks are stuck onto the clear parts and the wheel rims, the areas are sprayed over and, once the masks are taken off, sharply outlined frames remain, with no going over them by hand with a brush.

The Junkers Ju 88 was among the most versatile German machines of the Second World War — it served as a medium and dive bomber and later as a night fighter and reconnaissance aircraft. The A-4 version was the main bomber form, with a lengthened wing, more powerful engines and an extensively glazed front to the cockpit.

Use

• The masks follow the shape of the glazing of a particular kit in 1:48 scale — check beforehand that the set matches your kit.
• Stick them onto a perfectly dry, smooth and degreased surface and press the mask down all round, so that paint cannot creep under.
• Spray with an airbrush in thin layers, preferably in several passes — a heavy layer leaves a step at the edge of the mask.
• Spray the interior cockpit color first and then the final exterior shade; take the mask off with tweezers at an angle before the paint has fully cured.
• Besides the glazing frames, sets usually also contain masks for the wheel rims and tires, for a clean separation of colors.

Who it is for

For modelers who want their cockpit frames sprayed sharp and straight, without ragged edges and paint running over from a brush. It saves a great deal of time and frustration, above all on heavily framed glazing. Basic experience with an airbrush is useful.

An accessory for masking during spraying, not a model. The kit, paints and glue are not included in the package, unless stated otherwise.