1:48 Ki-61 II HIEN

Die-cut masks for the canopy frames of the Japanese Kawasaki Ki-61-II fighter in 1:48, for both sides of the clear part. Taken from the kit by RS Model.

Scale1:48
Manufacturer Montex
Product EAN8591111180283

Responsibility details are not available.

4.76 €
3.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The only Japanese production fighter with a V engine

The Kawasaki Ki-61 was given the name Hien, that is swallow, by the Japanese Army Air Force, and Allied airmen introduced the code designation Tony for it. Among Japanese types it was an exception: under the cowling it had no radial engine but a liquid-cooled twelve-cylinder derived from the German Daimler-Benz. The second production series received an enlarged vertical tail, a reworked fuselage and the stronger Ha-140 powerplant. That one, however, was produced so unreliably that dozens of airframes stood at the airfield without engines; the substitute born of necessity, with a radial engine, then made its name as the Ki-100.

How to use the set

The film is peeled off the backing with tweezers, laid on the frame concerned and pressed down with a wooden stick. Nothing is copied by eye in the process, as every part is die-cut to the measure of a particular shape. After the primer and the covering paint are sprayed, the mask is pulled off and the edge of the frame stays sharp along its whole length.

What the delivery contains

  • a set of masks for the outer side of the canopy
  • a set of masks for its inner side
  • a cut matching the clear part from the kit named
  • film that can still be shifted after it is laid on

The set belongs to a line that deals with the glazing exclusively. Do not look in it for the insignia of the Japanese Army Air Force or for any other national markings; the manufacturer has a separate line for those. The modeler also obtains the plastic parts and paints himself. All that is left to decide, then, is whether the canopy stays closed or slides back and exposes the cockpit.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For the 1:48 Ki-61-II by RS Model. The placing of the frames differs between kit manufacturers, so the masks need not fit another canopy.

A view from outside would give away that the inside of the frame is the color of the plastic. Spraying from both sides gives the frame a uniform shade and the clear area between the frames really looks like glass.

A single use is what is reckoned with. The tack drops after the first removal and the film also stiffens slightly from the finish, so it no longer seats well on curves.

Last seen

MontexMXSM484341:48

1:48 Ki-61 II HIEN

Die-cut masks for the canopy frames of the Japanese Kawasaki Ki-61-II fighter in 1:48, for both sides of the clear part. Taken from the kit by RS Model.
In stock
4.76 €
ReskitRS72-03781:72

1:72 Boeing P-8A Poseidon wheels set (weighted)

Boeing P-8A Poseidon wheels set (weighted) (1:72) is a resin 3D printed set of wheels with flattened tires for a model of the P-8A Poseidon maritime patrol aircraft from Reskit. It is a detail accessory.
In stock
12.76 €
Special MaskM720391:72

1:72 Gloster Meteor Mk.8/9 MASK

Pre-cut masks in kabuki film for a model of the British Gloster Meteor Mk.8/9 fighter in 1:72 scale. For the cockpit glazing and the wheels.
In stock
4.36 €
1:32 Panavia Tornado GR.4 interior-25 %Stock ClearanceFavorite
EduardED329811:32

1:32 Panavia Tornado GR.4 interior

The 1:32 photo-etched interior set for the Panavia Tornado GR.4 brings fine metal parts for the cockpit and the internal fittings of a model. It is an accessory, not a kit of the aircraft.
2 leftof 3
23 €17.24 € You save 5.76 €
Amazing ArtAMA1539

MASKING TAPE 2mm 18m

Amazing Art masking tape 2 mm x 18 m is a narrow, flexible kabuki tape for precise masking of curves, transitions and fine lines when spraying paint.
In stock
1.96 €
EduardED6723311:72

1:72 MiG-29A ejection seat 3D-printed

An ejection seat for the MiG-29A in 1:72 scale from Eduard. A resin set made by direct 3D printing, a fine detail of the seat for the cockpit of the fighter.
In stock
6 €
ArmoryARAW724081:72

1:72 Hawker

An accessory set for a model of an aircraft of the Hawker brand in 1:72 scale. The particular type of aircraft and the scope of the parts are given in the manufacturer's description.
In stock
5.96 €
Síra HobbyPC58

Modrozelená

Modeling acrylic paint Sira Hobby Blue-Green , a water-thinnable paint from a Czech manufacturer with an acrylic dispersion binder.
In stock
2.36 €
OmaskOMK800711:32

Waves 1/32 irregular

Omask 1:32 Waves irregular is a set of self-adhesive painting masks with an irregular wave pattern for spraying in 1:32 scale.
In stock
4.36 €
77propellerPRP049

SPRAY MASKING Airbrush STENCIL NO. 2

The airbrush masking stencil Spray Masking Airbrush Stencil No. 2 from the manufacturer 77propeller is a plastic stencil for spraying effects of wear and fading on the surface of a model.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.