1:48 Lockheed-Martin F-35B Lightning II cockpit PRINT is a resin set from Eduard that replaces the cockpit of the single-seat fighter in a kit of 1:48 scale. Neither the model of the aircraft nor its parts outside the cockpit are in the package.
Responsibility details are not available.
The set falls into Eduard's PRINT line, that is among parts made by 3D printing from resin. It aims at the cockpit of the F-35B fighter in a kit of 1:48 scale and serves as a replacement for the plastic parts that make up the cockpit from the base. It is not a model of the aircraft: without a part-built fuselage the set has no use.
The F-35B is the version of the modern single-seat combat aircraft adapted for short takeoff and vertical landing. Behind the cockpit it carries a lift fan driven from the engine and an exhaust nozzle that swivels downwards; thanks to that the machine operates from short decks and from improvised surfaces. The United States Marine Corps and European users operate it. The pilot's station differs fundamentally from older machines: instead of grouped dial instruments there is a single large-area touchscreen panel and an ejection seat that works even at zero speed on the ground.
First rinse the parts in lukewarm water with detergent, so that no print resin residue is left on the surface; otherwise the paint holds badly. Cut the supporting structure of the print off with a saw or a sharp cutter, never break it off. Make the joints with super glue, and sand wet while protecting your airways. Before closing the fuselage, try dry whether the inner walls get in the way anywhere.
The set assumes that you already have the base kit at home; on its own it does not make a model.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!