1:48 Messerschmitt Bf-109F-2 national insignia

1:48 Messerschmitt Bf 109F-2 — national insignia is a decal sheet from the manufacturer Eduard with national insignia for models of this fighter. It is not a kit but a standalone decal sheet.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

6.80 €
5.62 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

National insignia sheet for the Bf 109F-2 in 1:48 scale

A standalone decal sheet from Eduard production intended for models of the Messerschmitt Bf 109 fighter in the F-2 version in 1:48 scale. It contains national insignia, that is, the large-area markings for the wings and the fuselage, which tend to be the weakest point of kit decals. The sheet is useful as a replacement for yellowed or cracked decals from older kits and as a complement to sheets with the individual markings of particular machines. Compare the specific make-up and the number of marking variants with the illustration on the packaging.

The real subject

The Bf 109F, nicknamed Friedrich, was a development line of the German single-engine fighter with an aerodynamically cleaned-up airframe, rounded wing tips and no struts on the horizontal tail surface. The F-2 version was among the first machines of this line delivered in series and was armed with an engine-mounted cannon of a smaller caliber than later forms. The national insignia on this line appeared in several sizes and in forms with borders of differing width.

Application tips

Large-area markings are the most demanding to apply, because every imperfection of the surface shows through them. Lay down gloss clear beforehand, therefore: on a matte surface an air gap forms under the film and the decal silvers. Cut the sheet close to the artwork so that as little carrier film as possible is left. Carry the marking onto a wet surface and fine-tune the position with a soft brush, not with your fingers. Press the excess water out from the center toward the edges with a cotton bud. On the leading edge of the wing and at the fillets, decal softener helps draw the film onto the shape. Seal everything with a matte or semi-gloss clear coat according to the surface of the model.

Who the sheet is for

  • Builders of Bf 109F models in 1:48 scale
  • Modelers who need to replace old or damaged kit decals
  • Those interested in better printing of large-area national insignia
  • Those who build from their own documentation and add markings piece by piece

This is a standalone decal sheet, not a model. The kit, paints and clear coats are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

National insignia for a Bf 109F-2 model in 1:48 scale. Check the exact make-up and the number of variants against the illustration on the packaging.

No. It is a standalone decal sheet, used on a model that is already built or under construction.

On a matte surface air is left under the carrier film and the decal silvers. Gloss clear creates a smooth area on which the film disappears.

The national insignia differed in size and border between periods, so compare the shapes with the documentation for the machine you are building.

Last seen

EduardEDD480431:48

1:48 Messerschmitt Bf-109F-2 national insignia

1:48 Messerschmitt Bf 109F-2 — national insignia is a decal sheet from the manufacturer Eduard with national insignia for models of this fighter. It is not a kit but a standalone decal sheet.
In stock
6.80 €
MontexMXK323421:32

1:32 Curtiss P-40 2 canopy mask (inside and outside canopy frame mask)

Montex 1:32 Curtiss P-40 canopy masks are self-adhesive masks for the canopy framing, supplied separately for the outside and for the inside. This is not a kit but an accessory for a kit in 1:32 scale.
In stock
14.36 €
Kits-WorldKW480431:48

1:48 Boeing B-17G Flying Fortress

A 1:48 decal sheet for the Boeing B-17G Flying Fortress. It covers the machine 43-37516 with the code JJ-T and the art Tondalayo and the aircraft 42-31333 with the code LG-W and the name Wee Willie.
In stock
8.76 €
AML DecalsAMLD720151:72

1:72 Decals for Twin engined Yak's

Decals for twin-engine Yakovlevs 1:72 are a set of wet slide decals for building twin-engine Yakovlev aircraft in 1:72 scale.
In stock
6.36 €
ŘOP o.s.S700/0761:700

1:700 Battle ship USS Michigan BB 27

USS Michigan BB 27 is a resin kit of the first American dreadnought battleship in 1:700 scale from ROP o.s. Intended for experienced modelers.
In stock
82.36 €
Voyager ModelPE351168B1:35

1:35 WWII Russian KV-1 Mod.1942 Basic(B ver include Gun Barrel)(For TRUMPETER 09597)

A Voyager Model photo-etched detail set 1:35 for the Soviet heavy tank KV-1 mod. 1942 in version B, which according to the name also holds a gun barrel. It is an accessory to a plastic kit, not a model in its own right. The set is cut for the Trumpeter 09597 kit.
In stock
27.56 €
QuickwheelQWX-160071:16

1:16 Sd.Kfz. 251 - Wheels Road Tread (Deka Grip / for Das Werk Kits)

Tires carried as Deka Grip with a road tread, for a 1:16 model of the Sd.Kfz. 251 armored personnel carrier.
In stock
41.56 €
Dead DesignNM480981:48

1:48 F-4E/EJ/F/G Phantom II In And Out

1:48 F-4E/EJ/F/G Phantom II In And Out is a double-sided masking set for the glazing of the cabin from Dead Design. The templates are cut for the inner and the outer side of the canopy, so the frame looks right even when seen from the cockpit.
In stock
10.76 €
PANZER ARTRE35-0231:35

1:35 Sturmpanzer IV Mantlet with canvas cover

PANZER ART 1:35 gun mantlet with a canvas for the Sturmpanzer IV is a resin accessory for building the German assault vehicle. It is not a model but a detail replacement part.
In stock
5.56 €
MikromirMIM144-0261:144

1:144 Kh-22 (AS-4) Soviet long-range anti-ship missile

A plastic kit of the Soviet Kh-22 (AS-4) anti-ship missile in 1:144 scale from Mikromir. A stand-alone model of a large long-range missile for a display case or a diorama.
In stock
19.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.