SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here
1:48 P-51B canopy frame paint mask (birdcage) and wheel hub masks Tamiya

1:48 P-51B canopy frame paint mask (birdcage) and wheel hub masks Tamiya

8.76 €
Add to Cart

1:48 P-51B canopy frame paint mask (birdcage) and wheel hub masks Tamiya

A 1:48 masking set for the frames of the original framed glazing of the P-51B Mustang and for the wheel hubs, shaped to the Tamiya model.

Scale1:48
Manufacturer Furball Aero-Design
Product EAN9591111000054

Responsibility details are not available.

8.76 €
7.24 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The framed canopy of the early Mustangs

Before the Mustang received a bubble canopy, the glazing above the pilot was divided by a dense network of metal frames. Modelers use a nickname for it derived from a birdcage, and not by chance: this canopy is one of the most laborious items of the whole build. The P-51B version flew with it over Europe from the spring of 1944, where it was criticized at first mainly for the limited view to the rear, which some units answered by fitting a bulged British hood.

What the set contains

The cut pieces cover the individual areas between the frames of the canopy and the windshield, and discs for the wheel hubs are added to them. The material is a thin vinyl that follows the slight bulge of the glazing without wrinkling. The dimensions correspond to the plastic parts of the Tamiya P-51B model in the same scale, which is a separate item; without the matching plastic kit you therefore have no use for the cut pieces.

Recommended procedure

Wash the glazing in lukewarm water with detergent before masking and let it dry in the air rather than with a cloth. Transfer the cut pieces with the tip of a knife or with a toothpick and press them down from the center outward. The spraying of the inner cockpit shade is followed by the fuselage color; keep both coats thin so that no step forms along the edge. Apply the wheel discs only after the landing gear has been assembled, because you will find their center more easily that way.

Do not throw the leftover waste material from the sheet away. Narrow strips of vinyl come in useful for masking boundaries between shades on the fuselage, and the circular cutouts will serve when spraying small rings around openings. With the early version of the Mustang it also pays to decide in advance whether you will build a machine with the original canopy, because later modifications changed the shape of the whole enclosure.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is the original glazing of the early Mustang version, divided by a large number of metal frames. Later machines received a smooth bubble hood.

Yes, the shapes come from the P-51B model in 1:48 scale from Tamiya, which is a separate item.

Two thin ones are enough. A heavy coat creates a visible step at the edge of the mask, which cannot be removed after lifting it without sanding.

No. That one has a different shape and a different division of frames, and the cut pieces from this set do not fit it.

Last seen

Furball Aero-DesignFMS0301:48

1:48 P-51B canopy frame paint mask (birdcage) and wheel hub masks Tamiya

A 1:48 masking set for the frames of the original framed glazing of the P-51B Mustang and for the wheel hubs, shaped to the Tamiya model.
In stock
8.76 €
BP Q POSKET - IZUKU MIDORIYA VER. A (BP16791P)-25 %Stock ClearanceFavorite
BandaiBAN16791

BP Q POSKET - IZUKU MIDORIYA VER. A (BP16791P)

A collector item from the Q Posket line with the character Izuku Midoriya, in the version marked VER. A. The data on the box are binding.
Last one!
27.16 €20.36 € You save 6.80 €
WEIKERT DECALSWEIKDEC3341:35

1:35 PzKpfw VI TIGER Divis.SS Totenkopf, 1944 Pt.3

Weikert Decals 1:35 PzKpfw VI Tiger - SS Totenkopf, 1944 (part 3) is a set of wet decals for marking German Tiger heavy tanks in 1:35 scale.
In stock
8.76 €
Model MakerMM-D721831:72

1:72 Greek F-16 347 Mira 40th Anniversary

The 1:72 Greek F-16 347 Mira 40th Anniversary decal set from the manufacturer Model Maker offers the anniversary markings of a Greek F-16 for forty years of 347 Mira squadron.
In stock
12.36 €
New WareNWAM08841:72

1:72 F-14A Tomcat VF-41 Black Aces EXPERT kabuki masks

The 1:72 F-14A Tomcat VF-41 Black Aces EXPERT kabuki masks are a New Ware masking set from kabuki tape for a model of the F-14A Tomcat in the markings of the squadron VF-41 Black Aces. It is not a kit, but an accessory for painting.
In stock
6.76 €
PANZER ARTRE35-1041:35

1:35 Panzer IV Ausf. F/G (North Africa) Sand Armor

Applique armor for the Panzer IV Ausf. F and G 1:35 from PANZER ART, in the form for North Africa. A resin accessory, not a kit.
In stock
10.36 €
FineMoldsFM331:35

1:35 Imperial Japanese Army Medium Tank Type 4 Chi-To Planned Production Ver.

The plastic model Type 4 Chi-To (Planned Production Ver.) in 1:35 scale from FineMolds . A kit of the Japanese medium tank of the late Second World War in its planned production version.
In stock
43.96 €
DK DecalsDK480361:48

1:48 Slovak National Uprising 1944 - USAAF Air Support

DK Decals 1:48 Slovak National Uprising 1944 - USAAF air support is a decal set for finishing already built models of American aircraft in 1:48 scale.
In stock
11.96 €
Voyager ModelPEA3871:35

1:35 CHINESE PLA ZTZ 99A MBT Track covers (For Panda Hobby PH35018)

Brass track covers for the Chinese PLA ZTZ-99A tank, 1:35 scale from Voyager Model. A detail accessory for finishing, not a model of the tank. The set is cut for the Panda Hobby PH35018 kit.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.