An add-on set of small parts in 1:48 scale, the ver. A version. The item name does not specify the kind of parts; the packaging and the manufacturer's instructions state it.
Responsibility details are not available.
An add-on set for models in 1:48 scale. The ver. A designation distinguishes one of the versions within the range: variants B, C and D are released under the same name, and in several scales at the same time. When ordering, therefore, check which variant you are choosing. What exactly the package contains and which model it is intended for is stated by the packaging and the manufacturer's instructions; it cannot be read from the item name.
The parts are not polystyrene, so ordinary cement for plastic models will not join them. Use cyanoacrylate glue and apply it in a minute amount, best with the tip of a toothpick or a piece of wire. Cut the excess material off with a sharp blade a little away from the part and sand the rest down carefully so as not to disturb the shape. Work over a mat or over an open box, because a part of this size is very hard to find on the floor, and move it with tweezers with smooth jaws.
Before painting, wash the parts in lukewarm water with a drop of dish soap and degrease them, otherwise the paint will come off during handling. Apply a thin base layer and only then the paint. Dry fit them so that you know how much plastic has to be removed; only then reach for the blade.
The model, paints and glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
