1:48 Su-27K Sea Flanker w/Kh-41 Moskit EXPERT kabuki masks for Minibase

1:48 Su-27K Sea Flanker w/Kh-41 Moskit EXPERT kabuki masks for Minibase

10.36 €
Add to Cart

1:48 Su-27K Sea Flanker w/Kh-41 Moskit EXPERT kabuki masks for Minibase

Su-27K Sea Flanker with the Kh-41 Moskit, EXPERT kabuki masks, 1:48 are pre-cut New Ware masking parts for the Minibase kit. EXPERT is the widest level of the range.

Scale1:48
Manufacturer New Ware
Product EAN8591111248648

Responsibility details are not available.

10.36 €
8.56 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Su-27K Sea Flanker with the Kh-41 Moskit, kabuki masks EXPERT, 1:48 (New Ware)

A set of pre-cut kabuki masks for a 1:48 model of the carrier-borne Su-27K from the manufacturer Minibase. The addition in the name points to the release of the kit with the Kh-41 Moskit anti-ship guided missile. EXPERT is the highest of the three levels in which New Ware runs the set, with BASIC and ADVANCED standing below it. The level sets the range of masking, so EXPERT is the most complete of the three variants. It is not an aircraft model but an accessory to one.

The real subject

The Su-27K is the carrier-borne variant of the Su-27, later designated Su-33. It differs from the land-based version in its folding wings and tailplanes, a pair of canard foreplanes, strengthened landing gear, an arrestor hook and a retractable probe for in-flight refueling. It was meant to operate from an aircraft carrier with a ski-jump ramp instead of a catapult. The Kh-41 Moskit, known in its naval version as the P-270, is a heavy anti-ship guided missile.

Use and tips

The parts are die-cut on a carrier film. Lift them with the tip of a scalpel or with tweezers, lay them on a clean, degreased surface and press the edges down firmly with a toothpick. Apply the paint in thin coats and at lower pressure so that it does not run under the edge. On the cockpit glazing the interior color comes first, then the outer shade. Lift the mask off shortly after it has dried, while the layer is flexible, with a pull at an angle to the surface. Plan a wider range of masking in advance and work from the lightest shades toward the darker ones, so that areas do not have to be uncovered and covered again.

Who the set is for

  • Builders of the 1:48 Su-27K model from the manufacturer Minibase
  • Modelers who want the most complete of the three levels
  • Builders of display models who go after detail
  • More experienced modelers used to masking in several steps

This is a masking accessory, not a kit. The aircraft model, the paints and the glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is the highest of the three levels of the range. The level gives the range of masking, so EXPERT is the most complete of the three variants. The specific list of parts is given by the manufacturer.

The levels are sold separately. Before buying, compare what range of masking you want on the model.

For the 1:48 Su-27K Sea Flanker model from the manufacturer Minibase.

Applying the mask itself is simple, but a wider range calls for patience and a considered order of painting. For a first model a lower level is easier.

Last seen

New WareNWAM10031:48

1:48 Su-27K Sea Flanker w/Kh-41 Moskit EXPERT kabuki masks for Minibase

Su-27K Sea Flanker with the Kh-41 Moskit, EXPERT kabuki masks, 1:48 are pre-cut New Ware masking parts for the Minibase kit. EXPERT is the widest level of the range.
In stock
10.36 €
TechmodTECH481061:48

1:48 U.S. National Insignia 1943 to present (July 1943 to January 1947)

U.S. National Insignia 1943 to present 1:48 is a sheet of wet decals with American star-and-bar national insignia in many sizes for models of US aircraft.
In stock
7.96 €
Dead DesignNM721091:72

1:72 F-105B/D/F/G Thunderchief - National Insignias & Stencils (CORRECTED) for Hasegawa, Monogram, Trumpeter

Masks for the national insignia and technical lettering for a model of the F-105B/D/F/G Thunderchief in 1:72 scale, intended for the Hasegawa, Monogram and Trumpeter kits.
In stock
7.16 €
Pimp My MiniaturesDIO-060

Primed brick wall with pillars & italian roof tiles (12,5 cm x 6,5 cm) - cracked

A brick wall with posts and a top of rounded roof tiles, in a cracked rendering and with a base coat, measuring 12.5 by 6.5 centimeters.
In stock
25.56 €
Kits-WorldKW3D14810851:48

1:48 Grumman F4F Wildcat - Full 3D Colour Cockpit Set (for Eduard 82201/11166 kits)

A complete full-color cockpit set with a raised relief for a model of the Grumman F4F Wildcat in 1:48 scale. Cut for the Eduard 82201 and 11166 kits.
In stock
13.16 €
ELEFANTELE352591:35

1:35 DETAIL SET FOR JAGDTIGER HENSCHEL DECEMBER 1944 - 1945, FOR 2 VEHICLES

A resin detail set for the Jagdtiger with Henschel running gear from the production of December 1944 to 1945, 1:35 scale, contents for two vehicles.
In stock
19.16 €
Star DecalsSD35-8871:35

1:35 Befehls-Panzers. Bef-Panther A and G, Bef-Pz IV J, PzKpfw IV H

Star Decals 1:35 Befehls-Panzers is a set of decals with the markings of German command tanks, specifically the command Panthers Ausf A and G and the command PzKpfw IV Ausf J.
In stock
7.16 €
MASTERSM2000011:200

1:200 USS Arizona BB-39 (1941) - main gun barrels - 14in/45 (356mm) (12pcs)

MASTER 1:200 USS Arizona BB-39 (1941) main gun barrels is a set of twelve turned metal barrels of 356 mm caliber for a model of the battleship.
In stock
15.96 €
AberABR35A0181:35

1:35 Side skirts for Panzer IV Ausf.G and for Sturmpanzer IV ''Brummbar'' (early)

Side skirts for the Panzer IV Ausf. G and for the Sturmpanzer IV Brummbär (early version) in 1:35 scale from Aber. A photo-etched metal detail set, not a model in its own right.
In stock
16.40 €
MASTERAM481511:48

1:48 Northrop T-38 Talon / F-5B / RF-5A, E, S - Pitot Tube and 20mm gun barrels

Turned brass pitot tube and 20 mm cannon barrels for T-38 Talon, F-5B and RF-5A/E/S models in 1:48 scale. A precise metal accessory.
In stock
7.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.