Víkendové slevy -20 %! | Weekend Sale – 20% OFF! | MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO

1:48 Zlin Z-326 TFace

TFace masks for the Zlin Z-326 aircraft in 1:48 scale from the Czech maker Eduard. The TFace form masks the glazing from the outside as well as the inside.

Scale1:48
Manufacturer Eduard
Product EAN6591111000379

Responsibility details are not available.

12.40 € 9.32 €
7.70 € without VAT
−25 % You save 3.08 €
4 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

TFace masks 1:48 Zlin Z-326, Eduard

The set is not a model of the aircraft but pre-cut self-adhesive masks for its glazing in 1:48 scale. The TFace designation means that the sheet contains masks for both sides of the glazing, outer and inner. Thanks to that the interior color can be sprayed onto the inner side of the frames and the cockpit then looks right when seen from inside too, which shows a great deal on a two-seat aircraft with a large canopy. Eduard, a Czech maker from Obrnice near Most, die-cuts the masks from thin kabuki paper, which yields to curves and leaves no adhesive behind once removed.

The real subject

The Zlin Z-326 Trener Master belongs to the celebrated line of trainer and aerobatic aircraft from Otrokovice. It is a two-seat single-engine low-wing monoplane with an inline Walter Minor engine and retractable landing gear that served for pilot training as well as for competition aerobatics. The machines of this family stayed in service with flying clubs for a long time and remain among the best-known Czech sport aircraft to this day.

Tips for sticking them on and spraying

Wash and degrease the glazing, otherwise the mask will bleed. Stick the inner masks on first and spray the interior color, and only then close the part up, stick the outer masks on and continue with the base and the top color. Lift the masks out of the sheet with a scalpel, press them down and rub the edges over with a toothpick, above all where the canopy turns into a curve. Spray in thin coats, as a thick coat creates a step on the edge. Remove them soon after they have dried, pulling at an angle along the edge. On clear parts it pays to reach for a cyanoacrylate glue intended for canopies or for a dispersion glue for glazing, because ordinary cement for plastic fogs a clear part.

Who the set is for

  • Builders of Czech sport aircraft in 1:48 scale
  • Modelers who object to untreated frames when looking into a cockpit
  • Those who want sharp frames without cutting tape
  • Builders working with an airbrush and thin coats

The set contains masks only. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

That the sheet contains masks for both sides of the glazing. Besides the outer frames, the inner side can be masked as well and sprayed with the interior color.

It is not. It is a set of masks for the glazing, and you obtain the kit separately.

The inner ones first, then spray the interior color, close the part up and only then stick the outer masks on and continue with the outer color.

With a cyanoacrylate glue intended for canopies or with a dispersion glue for glazing. Ordinary cement for plastic models fogs a clear part.

Last seen

1:48 Zlin Z-326 TFace-25 %Stock ClearanceFavorite
EduardEX9121:48

1:48 Zlin Z-326 TFace

TFace masks for the Zlin Z-326 aircraft in 1:48 scale from the Czech maker Eduard. The TFace form masks the glazing from the outside as well as the inside.
4 left
12.40 €9.32 € You save 3.08 €
ZvezdaZV70201:144

1:144 AIRBUS A-350-1000

The Airbus A350-1000 in 1:144 scale — a kit of the modern long-haul wide-body airliner in injection-molded plastic from the manufacturer Zvezda.
In stock
35.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.