1:35 Wallpapers III (105x160mm) is the third number of the wallpaper line, meant for lining the walls of a model interior.
Responsibility details are not available.
This sheet with a wall pattern complements the other numbers of the same family and is used wherever the inside of a structure is to be seen. The name carries the 105x160 mm format. The sheet is flat, so it can be bent into a corner or wrapped around a curved wall, which is out of the question with cast cladding. The offcuts can also be used for small things: papering the inside of a cupboard, lining the wall behind a door or making a rolled-up strip lying on the floor.
The largest part of the work lies in cutting the openings accurately. A window and a door frame are best traced by laying the finished wall on the back of the sheet and drawing round it with a fine pencil. Cut inside the outline and fold the overlap into the opening; the joint then disappears. When you join two pieces side by side, run the seams into the corners or behind furniture; in the middle of an open area the eye will always find them.
Leave new wallpaper matte and only hint at a lighter faded band by the windows. An older surface gains credibility from a light glaze in a yellow-brown tone and a shadow at the skirting. Behind a stove and above a radiator a dark veil of soot works well, applied as dry pigment with a soft brush. A picture or a mirror taken down from the wall, by contrast, leaves a light rectangle with a sharp outline, because the protected area did not fade. Such a detail takes a few seconds and gives the scene a story of its own.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
