1:35 Upgrade kit for the M728 Combat Engineer Vehicle (for AFV Club 35254 Kit)

1:35 Upgrade kit for the M728 Combat Engineer Vehicle (for AFV Club 35254 Kit)

26.36 €
Add to Cart

1:35 Upgrade kit for the M728 Combat Engineer Vehicle (for AFV Club 35254 Kit)

An accessory set for a model of the American M728 Combat Engineer Vehicle in 1:35 scale, intended for the AFV Club 35254 kit.

Scale1:35
Manufacturer Eureka XXL
Product EAN5591111248648

Responsibility details are not available.

26.36 €
21.79 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The M728 Combat Engineer Vehicle was an American engineer vehicle built on the chassis of the M60 tank. In place of a classic gun it carried a short 165 mm weapon meant for demolishing obstacles and field fortifications, a blade at the front and, above the turret, a folding boom with a winch for raising loads and tearing wreckage out. Engineers cut a way through with it wherever an obstacle had to be removed or an embankment leveled, and did so under the protection of armor. The American army used it from the 1960s right up to the 1990s.

What the set solves

This is an accessory set in 1:35 scale intended for the AFV Club kit with the part number 35254. It supplements or replaces parts of the basic kit where a finer shape is needed than a molding allows. A list of the parts and the procedure for fitting them are given in the manufacturer's instructions; before you start, compare the parts with the instructions for the kit, so that you know which original sections are cut away and when their turn to be fitted comes.

Working with the parts

The parts are not polystyrene, and liquid cement for plastic will not hold on them. They are fitted with super glue applied in a tiny amount. Cut the surplus material away with a sharp blade a little way from the part and sand the rest off, so that thin shapes are not weakened. Lay everything in place dry first and check whether the part settles in its place without pressure. Before painting, wash and degrease the surface and lay down a thin coat of primer, so that further paint holds as well as it does on plastic.

  • An accessory set for the M728 CEV vehicle in 1:35 scale
  • Intended for the AFV Club 35254 kit
  • The real subject is an engineer vehicle on the chassis of the M60 tank
  • It is bonded with super glue, not with cement for plastic
  • Wash, degrease and use primer before painting

Who it is for

For modelers who are building the M728 from the kit named and want more accurate shapes on the vehicle's prominent features. The kit, the paints and the glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The AFV Club kit with the part number 35254 in 1:35 scale, as the name states. Compare the parts with the instructions for the kit before the build.

An American engineer vehicle on the chassis of the M60 tank. It carried a short 165 mm weapon for demolishing obstacles, a blade and a boom with a winch.

With super glue in a tiny amount. They are not polystyrene, so liquid cement for plastic will not hold on them. Wash and degrease them before painting.

No, this is an accessory set. The kit, the paints and the glue are not included, unless stated otherwise.

Last seen

Eureka XXLER-35711:35

1:35 Upgrade kit for the M728 Combat Engineer Vehicle (for AFV Club 35254 Kit)

An accessory set for a model of the American M728 Combat Engineer Vehicle in 1:35 scale, intended for the AFV Club 35254 kit.
In stock
26.36 €
3DF3DF1035081:35

1:35 ammunition belt 7,62x51

A 7.62x51 mm NATO ammunition belt (1:35) is a 3D-printed resin accessory for superdetailing machine guns and dioramas in 1:35 scale.
In stock
9.16 €
OWLOWLDA720101:72

1:72 Dornier Do-217K (W. Bradel) U5+AA Stab./KG 2

1:72 Dornier Do-217K (W. Bradel) U5+AA Stab./KG 2 is a sheet of wet decals in 1:72 scale for marking a particular Dornier Do 217 K staff machine. An accessory for a finished model.
In stock
3.56 €
IONIC Jade Green-25 %Stock ClearanceFavorite
AMMO of Mig JimenezIONIC-0117

IONIC Jade Green

A cool jade green from the IONIC acrylic palette. It is used for dragon scales, patinated bronze and still water on dioramas.
Last one!
3.56 €2.68 € You save 0.88 €
LifecolorLIFCT06

CT06 Italian M1929 Telo Mimetico - CAMOUFLAGE SET

CT06 Italian M1929 Telo Mimetico - CAMOUFLAGE SET is an acrylic set of shades for reproducing the oldest mass-printed camouflage pattern in the world.
In stock
10.36 €
C-22260

Porsche Carrera

In stock
6 €
A&A ModelsAA480151:48

1:48 An-3 Turboprop Utility Biplane

An injection-molded plastic kit of the Antonov An-3 turboprop utility biplane in 1:48 scale from A&A Models. The real subject is the turboprop modernization of the legendary An-2 biplane.
In stock
57.16 €
HR modelHRD72351:72

1:72 Avia B534/II

The decal sheet 1:72 Avia B-534 second series from HR model brings markings for the best known Czechoslovak biplane fighter of the 1930s.
In stock
6.36 €
DN ModelsDN32/827-0471:32

1:32 Saab Viggen Insignia And Numbers Paint Mask Set - Limited Edition

The limited set 1:32 Saab Viggen Insignia And Numbers Paint Mask Set - Limited Edition contains masks of Swedish marking and fuselage numerals in a large scale.
In stock
41.16 €
HAD modelsHAD320921:32

1:32 Ukrainian Su-27P1M Flanker B decal sheet

A decal sheet for the Ukrainian Su-27P1M Flanker B in 1:32 scale from HAD models is intended for large models of the heavy twin-engine fighter.
In stock
39.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.