The insignia set 1:24 Hawker Typhoon Mk.Ib Numbers And Insignia Paint Mask contains masks of roundels, numerals and code letters for a large model of the Typhoon.
Responsibility details are not available.
An insignia set, that is, a set of small elements which are laid one at a time and are best worked with using tweezers. It is cut from a thin masking tape. In quarter scale every inaccuracy of a decal stands out, which is why it pays to spray the British roundels, the squadron code letters and the fuselage numerals.
The Typhoon came about as a replacement for the Hurricane, but with the Napier Sabre engine it did not prove itself in the role of a high-altitude fighter. It found its place against ground targets. With a massive set of four 20 mm cannons, bombs and later rockets it became the main strike weapon of the Royal Air Force in the tactical support role during the invasion of Normandy, where it hunted columns, bridges and armored equipment. A recognition feature of the Mk.Ib version on the first machines was the doors into the cockpit in the manner of a car, which were later replaced by a hinged teardrop canopy.
The base must be smooth and degreased, as otherwise the paint will run under the edge. Lay the circular elements of the roundel from the outer ring toward the center and check the spacing against the documentation for the kit in advance. Apply the paint in thin layers and remove the mask before the film has fully cured. Take off any remaining adhesive with a soft pencil eraser; that will not damage the surface.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!