An eight-piece set of resin wheels with the Firestone Cross Country tread, meant for shoeing the semi-trailer of the British heavy transporter TRCU30 in 1:35 scale.
Responsibility details are not available.
Eight resin wheels with the Firestone Cross Country tread pattern, cut for the semi-trailer part of the British Scammell Pioneer tank transporter in 1:35 scale. The parts have a sharper drawing of the tread and of the sidewalls than injection-molded plastic parts and go on straight in place of the original kit wheels.
The transporter was made up of a pair: a six-wheeled tractor at the front and a lowboy semi-trailer on which damaged tanks were carried. It was the semi-trailer that stood hitched in the sand most of the time, so its tires were the most clogged with dust, and on a model the eye goes to them first. The number of pieces in the package matches the tires of the semi-trailer part, not of the tractor.
Wash the resin parts in lukewarm soapy water before gluing so that the mold release residue from the mold disappears. Cut the casting gates off with a saw and level the surface with wet abrasive paper, so that the wheel finally seats square on the axle. It is glued with super glue; protect your airways when sanding resin. The tread comes out when a thin dark wash runs into it over the base shade and the high points are gone over dry with a lighter tone.
The parts come in raw resin, without paints and without glue.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!