1:72 Dozer blade for M4 Sherman is a cast front bulldozer blade that the Czech brand Rattlesnake product has prepared for models of the Sherman tank.
Responsibility details are not available.
A resin accessory from the Czech manufacturer Rattlesnake product. It adds a front bulldozer blade to the M4 Sherman tank in 1:72 scale and turns an ordinary machine into the engineer version. The tank itself is not in the package.
Shermans with a blade cleared obstacles, broke paths through rubble, leveled the ground and pushed earth. The engineer versions accompanied the advance of the Allied units from Normandy to the Pacific and often went at the head of a column as the first machine to chew its way through a roadblock. The blade was fitted to a production tank, so it could be taken off as needed, and that is exactly why it turns up on machines of the most varied batches and theaters. Besides engineer work it also served in building earth positions, because the machine could push up cover for itself.
Degrease the parts, remove the sprue gates with a saw and level the surfaces. Try the assembly dry on the hull before you start gluing: the mounting of the blade arms tends to be the most sensitive point of the whole job at a small scale. The metal of the blade was worn by the material it pushed, so it pays to polish the edges with graphite or a dark metallic pigment after painting and to dust the underside with mud. Watch the mounting height as well: at such a small scale half a millimeter is enough and the machine looks as if it were sinking into the base.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!