1:72 Engine for M1124 MAXXPRO

An add-on set in 1:72 scale with an engine for a model of the MaxxPro armored vehicle. Intended for models with an open engine bay and for dioramas with equipment maintenance.

Scale1:72
Manufacturer Rattlesnake product
Product EAN1291111248677

Responsibility details are not available.

15.96 €
13.19 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The MaxxPro is an American wheeled armored vehicle in the MRAP category, that is a machine with a raised hull and a shaped floor meant to protect the crew from the blast of a mine or an improvised explosive device under the vehicle. Vehicles of this type reached American units in large numbers during the missions in Iraq and Afghanistan, and in the modeling range they are among the popular subjects of modern equipment.

What the set contains

The package holds the parts of the engine in 1:72 scale as an addition to a model of the vehicle. The set suits places where the engine bay is to be open, or a scene in which the vehicle is being repaired and the engine stands beside it. The number of parts, their arrangement and the way they are seated into the model are given in the instructions enclosed by the manufacturer.

  • 1:72 scale
  • an add-on set with the engine of the vehicle
  • for models with an open engine bay
  • also suitable as an element of a maintenance diorama
  • the seating of the parts is given in the manufacturer's instructions

Building and painting tips

Cut the excess material off with a sharp blade a little away from the part and sand the remnant down carefully, so as not to wipe away the fine detail. The parts are not polystyrene like an ordinary kit, so check the material and the suitable glue against the manufacturer's instructions. Wash and degrease everything before painting; paint does not hold on a greasy surface. In 1:72 scale the engine is small, so it pays to paint it and bring out the shadows before you seat it into the vehicle.

Who it is for

The set is for modelers who do not want to leave the engine bay empty or blanked off, and for builders of scenes in which equipment is undergoing repair. An open hood with a visible engine is a detail that draws more attention at a show than a perfectly closed model. The package holds the parts of this set; paints and glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It adds an engine to a model of the MaxxPro vehicle in 1:72 scale. It comes in wherever the engine bay is to be open, or in a scene with equipment under repair.

They are not polystyrene, so ordinary liquid cement for plastic has no effect on them. The suitable type of glue and the seating procedure are given in the instructions enclosed by the manufacturer.

Cut the excess material off with a sharp blade a little away from the part, sand the remnant down and wash and degrease the parts. Only then apply the base coat.

Paints and glue, and the model of the vehicle the engine is to be seated into. The package holds the parts of this set, unless stated otherwise.

Last seen

Rattlesnake productRPDA00031:72

1:72 Engine for M1124 MAXXPRO

An add-on set in 1:72 scale with an engine for a model of the MaxxPro armored vehicle. Intended for models with an open engine bay and for dioramas with equipment maintenance.
In stock
15.96 €
Firma4949T070/721:72

1:72 Windscreen Jeep Willys - covered

Windscreen Jeep Willys, covered (1:72) is a resin accessory of the covered windscreen for the American off-road vehicle Willys.
In stock
5.16 €
Very FireVFUSS181:350

1:350 Mk.33 76 mm Anti-Aircraft Gun 6 sets

Very Fire 1:350 Mk.33 76 mm Anti-Aircraft Gun 6 sets is a set of six 76 mm anti-aircraft gun mounts for models of ships in 1:350 scale. It is a detail accessory, not a model of a ship.
In stock
19.96 €
Síra HobbyX7

Zemitě šedá písek

Sira Hobby Earthy gray, sand is a water-thinnable texture paste in a neutral earthy gray shade with a finer, sandy grain, for diorama terrain.
In stock
6.76 €
Síra HobbyX5

Písčitá zem kámen

Síra Hobby Sandy earth - stone is a water-thinnable texture paste in the shade of sandy soil with a coarser, stony grain for the terrain of dioramas.
In stock
6.76 €
Síra HobbyX2

Písek

Sira Hobby Sand is a water-thinnable texture paste in a sand shade for creating sandy deposits and diorama terrain.
In stock
6.76 €
AiresAIR73961:72

1:72 F-5 A Freedom Fighter - Exhaust Nozzle (for Italeri / Revell Kits)

F-5A Freedom Fighter exhaust nozzle in 1:72 scale from Aires . It is a resin accessory, not a model , more accurate exhaust nozzles for detailing F-5A kits from Italeri and Revell . The base kit is needed for the build.
In stock
14 €
AiresAIR73951:72

1:72 F-16 CJ Block 50 - Exhaust Nozzle / CLOSED (for Tamiya Kits)

A resin F-16CJ Block 50 exhaust nozzle in the closed position 1:72 (Aires) replaces the plastic nozzle with a faithful resin part with the correct internal structure. The nozzle is shaped for the Tamiya kit.
In stock
16.80 €
AiresAIR49431:48

1:48 Jaguar GR.1/GR.1A - Speed Brakes (for Airfix Kits)

Aires 1:48 Jaguar GR.1/GR.1A: airbrakes is a resin set of brake panels that lets you display them extended together with faithful interior detail. An accessory for the Jaguar 1:48 kit from Airfix; it is not an airplane model.
In stock
10.80 €
AiresAIR49551:48

1:48 Cessna A-37 Dragonfly pylons for Trumpeter

Cessna A-37 Dragonfly — pylons (weapon pylons) in 1:48 scale from the resin detail maker Aires. An accessory for the Trumpeter plastic kit, not a standalone model.
In stock
20.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.