A conversion set in 1:32 scale that turns a model of the Messerschmitt Bf 109 into the high-altitude G-3 version. According to the name it is designed for kits from the Revell brand.
Responsibility details are not available.
The Messerschmitt Bf 109 G-3 belongs to the family of versions with the inverted V12 DB 605, which were nicknamed the Gustav. It came about as a machine for high altitude: it was given a pressurized cabin with a sealed canopy and the GM-1 system, which could raise the output of the engine for a few minutes where thin air already drags an aircraft down. It was a short series built alongside the ordinary Gustavs, and the recognition features are precisely the details around the cabin.
The conversion set replaces parts of the starting kit so that the G-3 version comes out of it. It is not a kit in itself: it assumes you already have the model and changes selected parts of it. According to the name it is cut for kits from the Revell brand in 1:32 scale. The extent of the parts and the procedure for fitting them are given in the manufacturer's instructions.
The parts are not polystyrene and are bonded with super glue. Cut the excess material away with a sharp blade a little way from the part and sand the remainder down so that you do not reduce the shape of the part itself. Wash and degrease the parts before painting and use a primer. With a conversion it pays to offer the parts up to the kit dry first and only then sand the mating surfaces.
For modelers of German fighters in 1:32 scale who want to build a less usual high-altitude version. The kit, paints and glue are not included in this set, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!