1:700 USS New York BB-34 Deck Masking Sheet (for Trumpeter kit 06711)

1:700 USS New York BB-34 Deck Masking Sheet (for Trumpeter kit 06711)

6.36 €
Add to Cart

1:700 USS New York BB-34 Deck Masking Sheet (for Trumpeter kit 06711)

A deck covering mask for USS New York BB-34 in 1:700 scale is a pre-cut self-adhesive masking set with which you spray the deck areas of the kit with sharp edges and no laborious cutting. The set is meant for the Trumpeter 06711 kit.

Scale1:700
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

6.36 €
5.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Deck masking set for USS New York BB-34 in 1:700 scale

This product is neither a wooden deck nor a decal. It is a set of pre-cut covering masks that you stick on the deck of the plastic kit of the battleship USS New York BB-34 during painting. The mask covers the areas that are to stay in another shade, so after spraying you get the edge exactly where the engraved relief of the deck puts it.

How to work with the mask

Spray the deck first in the shade that is to show as the lower one and let the paint dry out thoroughly. Only then stick the mask on, press it down with a blunt wooden stick over the whole area and especially carefully around the perimeter of every cut-out. It is worth going over the edges of the mask with a light coat of clear varnish, which seals any microscopic gaps so that the second color will not creep under. Only then spray the covering shade, in several thin coats rather than one heavy one.

Removal and the commonest mistakes

Take the mask off while the paint is freshly dry but not yet fully cured, or you will peel a piece of the coat off with it. Draw it back over itself at an angle rather than straight upward, and help yourself with flat-jawed tweezers. If the edge does tear slightly, put it right with a fine brush before you give the model its varnish and weathering. The mask is for single use; allow for that when planning the painting.

Who the masking set is worth it for

  • Modelers who want to spray the deck rather than cover it with veneer
  • Builders who do not care to cut masking out of tape by hand
  • Anyone after clean transitions between deck shades in a small scale

This is a masking accessory for a plastic kit, not a model and not a wooden deck. The paints, varnish and kit are not included in the package. The mask is cut for the Trumpeter 06711 kit; check the match before buying.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This product holds only covering masks for painting. A wooden veneer deck is sold as a separate item.

Reckon on one use. The adhesive layer loses its tack once removed and the mask often tears during removal.

Once it is stuck on, go over the edges of the mask with a thin coat of clear varnish and spray several light coats instead of one heavy one.

The cut matches the Trumpeter 06711 kit. On another release the cut-outs need not coincide with the engraving of the deck.

Last seen

Artwox ModelBM200051:700

1:700 USS New York BB-34 Deck Masking Sheet (for Trumpeter kit 06711)

A deck covering mask for USS New York BB-34 in 1:700 scale is a pre-cut self-adhesive masking set with which you spray the deck areas of the kit with sharp edges and no laborious cutting. The set is meant for the Trumpeter 06711 kit.
In stock
6.36 €
Quinta StudioQD482211:48

1:48 F-16B 3D-Printed & coloured Interior on decal paper (Hasegawa)

Quinta Studio 1:48 F-16B, a 3D printed color interior on decal paper (Hasegawa), is a set for the two-seat cockpit of the Viper. Under the one-piece bubble canopy the whole interior is in view, so the detail pays off.
In stock
25.16 €
Dead DesignNM721341:72

1:72 Fulmar Mk.I/II National Insignias Special Hobby

Masks for British roundels on a model of the Fulmar Mk.I and Mk.II in 1:72 let the national insignia be laid straight into the top finish.
In stock
7.16 €
Syhart DecalSY48-0831:48

1:48 F-16AM Falcon FA-123 Solo Display 2015 - Blizzard Belgian AF

A winter-themed finish named Blizzard, worn by the Belgian FA-123 fighter in the 2015 season. A decal sheet in 1:48 scale.
In stock
14.36 €
Aires/QuickboostQB726471:72

1:72 F-14 Tomcat ECS heat exchanger exhaust grills

Replacement grilles for the heat exchanger outlet of the air conditioning system for a model of the F-14 Tomcat aircraft in 1:72 scale.
In stock
3.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.