Replacement wheels for the B-24 Liberator model in 1:72 scale with a grooved tread pattern.
Responsibility details are not available.
The Consolidated B-24 Liberator was an American four-engine heavy bomber of the Second World War. Its hallmarks were a narrow high-aspect-ratio wing set high on the fuselage, a twin vertical tail and a slab-sided fuselage with a roomy bomb bay. The machine stood on nose gear and was powered by four radial engines. A fully loaded bomber rested on the main wheels with considerable weight, so the tires were among the parts that were changed often.
Replacement wheels in 1:72 scale with a grooved tread pattern, that is with longitudinal grooves running around the circumference of the tread. In a small scale kit wheels tend to be only suggested, and replacing them is among the changes that show most on a finished model. The parts list is given in the manufacturer's instructions.
Wash and degrease the wheels before painting. Cut off the excess material with a sharp blade a little away from the part and sand the remainder so that the shape of the tread is preserved. Paint the tire dark gray rather than black, then bring out the grooving with a dry brush one shade lighter. Paint the wheel rim separately. The tread pattern varied on period aircraft tires, so check it against photographs of the particular machine.
The set is intended for modelers who build the B-24 in 1:72 scale and want to replace the simplified kit wheels with a readable tread pattern. Paints, glue and the kit are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!