29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:72 B-26 (A-26) Invader wheels set type 1

Reskit 1:72 B-26 (A-26) Invader — wheel set, type 1 is a resin replacement for the landing gear wheels of a model of the twin-engine bomber.

Scale1:72
Manufacturer Reskit
Product EAN8591111000000

Responsibility details are not available.

7.96 € 5.96 €
4.93 € without VAT
−25 % You save 2 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Reskit 1:72 B-26 (A-26) Invader — wheel set, type 1

A resin accessory in 1:72 scale for a model of the twin-engine attack bomber Douglas Invader, which is known under two designations: originally A-26, later B-26. The set replaces the plastic landing gear wheels from the kit. It is not a model of the aircraft but a detail part in its own right.

Type 1 and the other versions

Reskit makes wheels for the Invader in several versions distinguished by a type number, and this is type 1. Exactly how the castings differ from one another is not given by the manufacturer in the name; the type designation is given on the box of the set. On propeller aircraft of this category the differences between wheel types usually concern the hub design or the tread pattern of the tire. The safest approach is to compare the set with photographs of the particular machine you are building; the type designation is given by the manufacturer on the box of the set.

Fitting and painting tips

Wash the castings in warm water with detergent, otherwise the paint will not hold on any mold release agent residue. On wheels the casting block is usually on the contact face of the tire — cut it off with a fine-toothed saw and level the face on abrasive paper laid on glass, so that the wheel stands straight and the model does not sit lopsided. Sand resin wet and with respiratory protection. It is bonded with super glue; before it sets, stand the model on a flat board and check that it rests on both main wheels and on the nose wheel. Paint the tires in a dark gray with a hint of brown and the hubs according to the particular machine. The wheels of a twin-engine bomber will take fairly heavy dusting, because an aircraft of this type operated from field airfields.

Who the set is for

  • builders of twin-engine bombers in 1:72 scale
  • modelers bothered by the seam and the soft detail of plastic wheels
  • builders of dioramas with an aircraft on the ground
  • more experienced modelers working with resin

The accessory is supplied unpainted and without a kit. Paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The manufacturer does not give it in the name; the type designation is on the box of the set. We recommend comparing the set with photographs of the particular machine you want to build.

The Douglas Invader carried both designations during its service, so the product gives both to make it clear which aircraft is meant.

It is not. These are resin wheels on their own; the plastic model has to be obtained separately.

Last seen

1:72 B-26 (A-26) Invader wheels set type 1-25 %Stock ClearanceFavorite
ReskitRS72-02601:72

1:72 B-26 (A-26) Invader wheels set type 1

Reskit 1:72 B-26 (A-26) Invader — wheel set, type 1 is a resin replacement for the landing gear wheels of a model of the twin-engine bomber.
2 leftof 6
7.96 €5.96 € You save 2 €
TrumpeterTR028701:48

1:48 TA-3B Skywarrior Strategic Bomber

Douglas TA-3B Skywarrior 1:48 from Trumpeter — an injection-molded plastic kit of the training version of the large American carrier aircraft.
In stock
46.36 €
BANON DESIGNBAN005-05

BAN005 torx convex head Ducati 0,5mm

Miniature screw heads with a convex shape and a star-shaped torx profile, a marked size of 0.5 mm, in a version after Ducati motorcycles.
In stock
10.36 €
TrumpeterTR022641:32

1:32 P-47D Thunderbolt Dorsal Fin

A large injection-molded plastic kit of the Republic P-47D Thunderbolt (Dorsal Fin) in 1:32 scale from Trumpeter, the American fighter with a dorsal fin ahead of the vertical tail.
In stock
35.56 €
Aires/QuickboostQB724611:72

1:72 Douglas C-47 Skytrain air intakes

A resin accessory, Quickboost Douglas C-47 Skytrain air intakes 1:72 — one-piece replacement engine air intakes for advanced modelers. It is not a model but a detail part.
In stock
6.36 €
MAiMMAIM241121:24

1:24 Ventilation Shaft - (small Version 27x27mm)

Ventilation shaft, small version 27x27 mm (1:24, MAiM) is a resin diorama accessory. It is not a figure or a vehicle.
In stock
12.76 €
Model SceneVG3-0061:32

1:32/1:35 Jelení jazyk

The 1:32/1:35 Hart's Tongue Fern is laser-cut low vegetation in fine paper imitating the hart's tongue fern, a scenic accessory for dioramas in 1:32 and 1:35 scale.
In stock
5.16 €
QuickwheelQW-0621:35

1:35 CA L6/40 - Italeri

The 1:35 Carro Armato L6/40 wheel masking set from the Quickwheel company covers the disk of a road wheel, so that you spray the rubber separately and without drawing around with a brush. The cut-outs are cut for the wheels from the kit of the Italeri company.
In stock
6.60 €
PlusmodelPMO561

Olověné drátky půlkulaté 1,0 mm

Half-round lead wires 1.0 mm from Plusmodel are soft, shapeable wires with a half-round (D) profile for making heavier piping, hoses and lines on models and dioramas.
In stock
4.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.