1:72 F-107 Ultra Sabre National Insignia  Trumpeter

1:72 F-107 Ultra Sabre National Insignia Trumpeter

7.96 €
Add to Cart

1:72 F-107 Ultra Sabre National Insignia Trumpeter

A set of masks for spraying the national insignia of the American F-107 prototype in 1:72 scale, prepared for the Trumpeter kit.

Scale1:72
Manufacturer Dead Design
Product EAN8591111732574

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The F-107 was an American prototype that came about by developing the F-100 Super Sabre fighter and competed for the role of a fighter-bomber. At first glance you will recognize it by the unusually placed air intake above the cockpit, right behind the pilot's head; this arrangement did not catch on with production aircraft. Only three examples were built, the machine did not reach the inventory and it did not succeed in the competition. That is precisely why it is a rewarding subject: on the shelf stands something most visitors will not recognize, and yet it is clearly related to the well known Sabre.

What the set offers

A set of masks in 1:72 scale lets the insignia be sprayed instead of applying decals. It defines the area, the paint is laid on with an airbrush and once the mask is lifted the insignia stays directly in the finish, with no carrier film and with no edge that would reflect on a glossy surface. That is useful especially on a prototype that wore a predominantly bare metal surface.

  • National insignia masks for an F-107 model in 1:72 scale
  • Prepared for the Trumpeter kit
  • A sprayed insignia has no glossy edge of decal film
  • The shade and the degree of wear of an insignia stay up to the modeler

Tips on application and spraying

The finish under a mask must be perfectly matured, otherwise it will peel away with it during removal. Clean the area of dust and grease, seat the mask with tweezers and press the edges down with a toothpick. Spray square to the surface and in thin coats so that paint does not run under an edge. On a metal surface, count on a smooth glossy base holding a mask worse than a matte one, so do not press it down by force and lift it off soon after the paint has dried.

Who it is for

For modelers who build American equipment of the 1950s in 1:72 scale and want the insignia sprayed. The kit, paints and thinner are not part of the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the name, to the F-107 kit from the Trumpeter company in 1:72 scale. Before spraying, seat the mask dry and check whether it fits the shape of the part.

It arises directly in the finish, so it has no carrier film and no edge that would reflect on a glossy surface or silver in time.

Let the base mature thoroughly and free it of grease. Press the mask down only lightly with a toothpick and lift it off shortly after the paint has dried.

Your own kit, paints, thinner and an airbrush. They are not in the package, unless stated otherwise.

Last seen

Dead DesignNM721751:72

1:72 F-107 Ultra Sabre National Insignia Trumpeter

A set of masks for spraying the national insignia of the American F-107 prototype in 1:72 scale, prepared for the Trumpeter kit.
In stock
7.96 €
ŘOP o.s.F35/1061:35

1:35 Betonausführung 1917 (Feste Kaiser Wilhelm II.)

A resin kit of the Betonausführung 1917 (Feste Kaiser Wilhelm II.) in 1:35 scale from the Czech manufacturer ROP, intended for experienced modelers.
In stock
30.76 €
AberABR16L051:16

1:16 German 88 mm KwK 36 L/56 Tiger I Early Barrel

Aber – an 88 mm KwK 36 L/56 barrel for the Tiger I, early form (1:16) is a turned metal replacement for the barrel of the German gun for a faithful detail on a model.
In stock
49 €
Artwox ModelAW200441:700

1:700 Imperial Chinese Navy 'Chao Yung&Yang Wei' (For S-Model PS700003)

A veneer deck for the Chinese cruisers Chao Yung and Yang Wei in 1:700 scale from Artwox Model will replace the plastic deck with self-adhesive wooden veneer with the laying of the planks printed on it.
In stock
8.76 €
Dead DesignUC320081:32

1:32 Mitsubishi A6M5/A6M7 Reisen undercarriage bay paint masks

The Mitsubishi A6M5/A6M7 Reisen landing gear bay masks 1:32 keep airbrush overspray out of the painted interior of the bay.
In stock
6.36 €
Aires/QuickboostQB491711:48

1:48 SEPECAT Jaguar GR.1/GR.1a - Chaff and Flare Dispensers Airfix

Quickboost (Aires) 1:48 SEPECAT Jaguar GR.1/GR.1a - countermeasure dispensers is a resin detail accessory for the Airfix kit in 1:48 scale. It is not an aircraft model but replacement parts that raise the fidelity of the defensive fit.
In stock
6.36 €
ArmoryARAW323191:32

1:32 B-17F/G Flying Fortress wheels w/ weighted tyres type "a" (GY)

1:32 B-17F/G Flying Fortress wheels with weighted tires type a (GY) are a resin replacement for the main landing gear wheels of the late Flying Fortresses. An accessory to a model, not a kit of the aircraft.
In stock
13.56 €
Pimp My MiniaturesAFVs35-2151:35

1:35 Sd.Kfz 222 late road wheels set with spare (weighted) MIX (for Tamiya)

A combination of different tread patterns in a single set of weighted wheels for the late shape of the Sd.Kfz 222 armored car. A spare wheel is there too, the shaping aims at the model from Tamiya, 1:35 scale.
In stock
16.36 €
Dead DesignVM722001:72

1:72 C5M1/2 Babs National Insignias And Markings (For LS/Arii Kits)

Templates for the national insignia and markings for the reconnaissance Mitsubishi C5M1/2 Babs in 1:72 scale from the Dead Design brand. The insignia is sprayed in paint.
In stock
6.76 €
PeewitPWM720591:72

1:72 Mil Mi-4/Harbin Z-5 - pro modely Směr (původně Kovozávody Prostějov 1994)

Cut self-adhesive Peewit painting masks for a model of the transport helicopter Mil Mi-4 / Harbin Z-5 in 1:72 scale. They cover the frames of the cockpit glazing during spraying. It is not a kit.
In stock
5.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.