1:72 F-4EJ Phantom II ADVANCED kabuki masks

Kabuki masks 1:72 for the F-4EJ Phantom II at the ADVANCED level are pre-cut self-adhesive masks in the extended extent. An accessory for painting a model, not a kit.

Scale1:72
Manufacturer New Ware
Product EAN8591111248648

Responsibility details are not available.

7.16 €
5.92 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Kabuki masks 1:72 for the F-4EJ Phantom II, the ADVANCED level

A pre-cut self-adhesive masking set of kabuki tape for a model of the Japanese version of the Phantom in 1:72 scale. With this manufacturer the ADVANCED level is a designation of the extent of the set: it offers the BASIC, ADVANCED and EXPERT variants alongside one another, and they differ in how large a part of the model the masks cover, so the same name of the type in two names does not mean a duplicate. Kabuki tape is a thin paper carrier: it adapts to the curve of the canopy, seals on an edge and leaves no adhesive after removal. It is not a kit or a finished model, but an accessory for painting.

The real subject

The F-4EJ was the version of the McDonnell Douglas Phantom II fighter aircraft intended for the Japan Air Self-Defense Force and built in Japan under license. It came from the F-4E version, a two-seat twin-engine supersonic machine with a tandem cockpit and divided glazing of the canopy. For a modeler it is precisely that glazing that matters: it is made up of several separate parts with thin frames, where masking by hand is hard to keep to the same width.

Application and spraying tips

First degrease the glazing in lukewarm soapy water and let it dry freely. Transfer the mask with tweezers, seat it dry according to the engraved frames, check its position and only then press it down with a soft tool around the whole circumference. Sort a more extensive set and stick all of it on beforehand, so that you do not have to re-mask during painting. Apply the paint in thin coats; a first thin coat in the shade of the frame will seal the edge and hide any seepage. Take the mask off shortly after it has dried, with a pull at a sharp angle toward yourself.

Who the set is for

  • Modelers building Japanese combat aircraft in 1:72 scale
  • Those for whom the basic level of masks is not enough
  • Airbrush painting of two-seat cockpits with thin frames
  • Builders who do not want to cut masks by hand

The set of masks is an accessory for painting a model. The model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The F-4EJ is the Japanese version built under license and derived from the F-4E. The details of the airframe and the equipment differ between the individual versions, so reach for a mask for the particular version.

It is not. The level in the name is a distinguishing detail and denotes the extent of the set, not an identical product.

No, these are only masks. The model, the paints and the glue are bought separately.

No, it is self-adhesive. It is enough to degrease the glazing and press the mask down around the whole circumference.

Last seen

New WareNWAM10211:72

1:72 F-4EJ Phantom II ADVANCED kabuki masks

Kabuki masks 1:72 for the F-4EJ Phantom II at the ADVANCED level are pre-cut self-adhesive masks in the extended extent. An accessory for painting a model, not a kit.
In stock
7.16 €
Mettalic DetailsMD35031:35

1:35 German grenades M39 and M24

Metallic Details 1:35 German M39 and M24 grenades is an add-on set of miniature resin castings with photo-etched crates for dioramas and the equipment of models. It is not a kit of a vehicle.
In stock
12.76 €
ELEFANTEL352051:35

1:35 CHIEFTAIN ENGINE DECK LIFT HANDLES - LATE MARKS, FOR ONE VEHICLE

A detail set of the engine deck lift handles of the Chieftain tank (late versions) in 1:35 scale, with contents for one vehicle.
In stock
5.16 €
QuickwheelQW-0361:35

1:35 AAVP-7A1 RAM/RS Hobby Boss

The 1:35 AAVP-7A1 RAM/RS wheel masking set is a sheet of pre-cut templates for separating the rubber tires from the disks of the road wheels. The set is cut for the kit from the manufacturer Hobby Boss.
In stock
5.96 €
Amazing ArtAMA1734

ACRYLIC ENAMEL - Khaki Grey Mat 15ml

ACRYLIC ENAMEL - Khaki Grey Mat 15 ml is a water-thinnable acrylic modeling paint in a khaki gray shade with a matte finish. Despite the name Enamel it is an acrylic, not a solvent-based enamel.
In stock
1.16 €
1:35 US M1 MCR Mointing base for M1 Abrans tank-25 %Stock ClearanceFavorite
DEF ModelDM350761:35

1:35 US M1 MCR Mointing base for M1 Abrans tank

US M1 MCR Mounting base is a resin detail set in 1:35 scale for fitting a mine clearing roller (MCR) to the M1 Abrams tank.
3 left
22.76 €17.08 € You save 5.68 €
CMKCMK45041:48

1:48 Lysander Smoke Curtain Installation Container for Airfix kit

A resin container for a Smoke Curtain Installation, intended to be slung under a Lysander aircraft in 1:48 scale. According to the name the set is built for the Airfix kit.
In stock
12.76 €
1:32 Dassault Mirage IIIC exhaust nozzle-25 %Stock ClearanceFavorite
ReskitRSU32-00261:32

1:32 Dassault Mirage IIIC exhaust nozzle

The Reskit exhaust nozzle for the Dassault Mirage IIIC in 1:32 scale is a resin accessory that replaces the simplified part from a kit. It is not a model of the aircraft.
2 leftof 3
18.36 €13.76 € You save 4.60 €
AFV ClubAFV351391:35

1:35 38cm RW6-1 L/5.4 Assault Rocket for Sturmtiger

The AFV Club 1:35 — 38 cm RW6-1 L/5.4 rocket projectiles for the Sturmtiger is a detail addition with faithful rocket projectiles. It is not a vehicle kit, but an ammunition set.
In stock
9.96 €
Exotic DecalsEXOT720021:72

1:72 Me 110 Razarac in Yugoslav service

Exotic Decals 1:72 Me 110 Razarac in Yugoslav service is a decal sheet with the markings of the Messerschmitt Bf 110 heavy fighter in Yugoslav colors.
In stock
8.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.