LAST CHANCE! 20% OFF Ends Tonight!

1:72 McDonnell-Douglas FG.1/FGR.2 Phantom Pt.6

The Xtradecal 1:72 decal sheet for the British Phantoms FG.1 and FGR.2 is the sixth part of a series devoted to the British versions of this machine. An accessory for models in 1:72 scale.

Scale1:72
Manufacturer Xtradecal
Product EAN8591111000000

Responsibility details are not available.

11.16 €
9.22 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Decals 1:72 McDonnell Douglas Phantom FG.1 and FGR.2, the sixth part (Xtradecal)

A decal sheet from the British brand Xtradecal in 1:72 scale intended for models of the Phantom in the British FG.1 and FGR.2 versions. It is the sixth part of a series that covers these machines step by step, so as a rule it does not overlap with the earlier parts. The particular aircraft are given by the manufacturer on the packaging of the sheet and before buying it pays to compare them with the model you want to build.

The real subject

The British Phantoms differed from the American versions above all in their powerplant. In place of the original engines they were given Rolls-Royce Spey turbofans of greater diameter, which called for a wider rear fuselage, deeper air intakes and further changes to the airframe. The FG.1 version was adapted to operation from aircraft carriers, while the FGR.2 version came about as a multirole machine for land bases and carried out fighter as well as reconnaissance and strike tasks. In service the British Phantoms were held from the end of the 1960s until the first half of the 1990s.

Use and application tips

Decals belong on a smooth glossy base. Matte paint is porous, the air under the carrier film stays in it and shows itself as a grayish silvery veil that can no longer be removed. Dip the cut-out decal in lukewarm water for only a few seconds and let it rest on a paper backing until it releases by itself. Longer soaking washes the adhesive away and the decal then will not hold on the model. You will fine-tune the position with a brush and a drop of water, soak the surplus water up with a paper towel and settle the decal at the end with a softener. Once it is perfectly dry, go over the whole model with a final varnish in the degree of sheen you want.

Who the sheet is for

  • modelers building the British versions of the Phantom in 1:72 scale
  • those interested in post-war British aviation equipment
  • those who want to replace the decals supplied in the box
  • collectors of the individual parts of this decal series

This is a decal sheet, that is an accessory for a kit. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is only a decal sheet, that is an accessory for a kit, which has to be obtained separately.

Onto a smooth gloss varnish. On a matte base air is held under the carrier film and the decal silvers.

The particular machines and their coloring are given by the manufacturer on the packaging of the sheet, so compare it before buying with the model you want to build.

It softens the carrier film so that it clings to engraved lines and curves, and it suppresses the glossy edge around the decal.

Last seen

XtradecalX722951:72

1:72 McDonnell-Douglas FG.1/FGR.2 Phantom Pt.6

The Xtradecal 1:72 decal sheet for the British Phantoms FG.1 and FGR.2 is the sixth part of a series devoted to the British versions of this machine. An accessory for models in 1:72 scale.
In stock
11.16 €
1:35 Motorcyclist No.1
-20 %
Favorite
Black Dog modelBDF352561:35

1:35 Motorcyclist No.1

Motorcyclist No.1 is a figure of a motorcyclist in 1:35 scale by the Czech manufacturer Black Dog, meant to complete models and scenes.
In stock
14.36 €11.49 € You save 2.87 €
1:48 P-26A/C Peashooter
-20 %
Favorite
EduardED482651:48

1:48 P-26A/C Peashooter

Eduard 1:48 P-26A/C Peashooter is a photo-etched detail set for sharpening models of the American prewar fighter Boeing P-26. It is not a model but a metal accessory for a built-up kit.
In stock
8 €6.40 € You save 1.60 €
ETA dioramaETA8241:35

1:35 Wooden Floor

A wooden floor in 1:35 scale for building interior scenes. It forms the surface on which figures, furniture and vehicles are placed.
In stock
5.96 €
LifecolorLIFCS54

CS54 - NMM Steel Set

Lifecolor NMM Steel is a set of six matte acrylics for painting steel with the non-metallic metal (NMM) technique.
In stock
17.96 €
1:72 MiG-29A Fulcrum
-20 %
Favorite
EduardSS1831:72

1:72 MiG-29A Fulcrum

Eduard 1:72 MiG-29A Fulcrum is a photo-etched detail set, not a model. It adds fine metal detail to a plastic kit of the MiG-29A Fulcrum that injected plastic cannot manage.
In stock
3 €2.40 € You save 0.60 €
1:35 Králíkárna
-20 %
Favorite
PlusmodelPMO2181:35

1:35 Králíkárna

A rabbit hutch in 1:35 scale, five resin parts with a photo-etched fret. A rural accessory for a yard and a garden.
In stock
17.56 €14.05 € You save 3.51 €
MiniartMA490231:48

1:48 British WWII Bombs

MiniArt British WWII Bombs 1:48 is a plastic set of British aerial bombs of the Second World War. It is not an aircraft model but an accessory for the racks and bomb bays of models and for airfield dioramas in 1:48 scale.
In stock
11.96 €
TamiyaTA74103

HG Straight Tweezers - Reverse Action

Tamiya HG straight reverse action tweezers are quality modeling tweezers with reverse action: squeezing releases them and at rest they hold a part clamped, so they save the hand during long work.
In stock
15.16 €
1:72 Supermarine Spitfire Mk.VIII
-20 %
Favorite
EduardED74621:72

1:72 Supermarine Spitfire Mk.VIII

Eduard 1:72 Supermarine Spitfire Mk.VIII is an injection-molded plastic kit of the tropicalized version of the British Spitfire fighter in the small scale.
In stock
13.80 €11.04 € You save 2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.