20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:72 NATO/ISAF Bushmaster

The Bushmaster in NATO and ISAF fit 1:72 is a plastic kit of the tough Australian wheeled vehicle from the manufacturer Dragon. The model is supplied unassembled and unpainted.

Scale1:72
Manufacturer Dragon
Product EAN8991111000078

Responsibility details are not available.

25.96 € 19.48 €
16.10 € without VAT
−25 % You save 6.48 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The Bushmaster in NATO and ISAF fit 1:72 — a plastic kit (Dragon)

An injection-molded plastic kit of the Bushmaster wheeled armored vehicle in the form used by NATO and ISAF units, in 1:72 scale from the manufacturer Dragon. The model is supplied unassembled and unpainted, so the builder chooses the color scheme and the degree of patina themselves. Take care when choosing: the same vehicle also comes out as a finished collector's model, which is not built.

The real subject

The Bushmaster is a wheeled armored vehicle in a 4x4 layout, developed and produced in Australia. It belongs to the category of vehicles with protection against mines and improvised explosive devices: the hull has a shaped floor deflecting the blast wave away from the crew and a high-set space for the carried infantry. The design was driven by a requirement for transfers over long distances in demanding terrain, so it places emphasis on range and on bearable conditions for the crew. During international operations in Afghanistan a number of other states besides Australia operated the vehicle, among them the Netherlands and the United Kingdom.

Building and painting tips

It is advisable to separate the parts from the sprues with side cutters and to level the marks left by the gates with a file. Gluing is best dealt with using a thin cement for plastic, which runs into the joint by capillary action. With a wheeled vehicle it is crucial to build the chassis so that all four wheels sit down on the surface — the model is tall and any crooked wheel shows at once. It is practical to paint the wheels separately and to fit them only at the end, which saves masking the tires. It is good to glue the glazing and the vision blocks with a cyanoacrylate glue intended for clear parts, so that they do not go cloudy. Lay a primer on before painting and use an airbrush on large areas. Gloss varnish will help under the decals, and a final matte varnish will even the surface out. Build the patina up gradually, and on this type of vehicle a dusty cast on the lower areas and around the wheel arches proves itself.

Who the model is for

  • Anyone interested in modern wheeled armored vehicles
  • Modelers building the equipment of international operations
  • Collectors of military equipment in 1:72 scale
  • Beginning as well as advanced builders — a wheeled chassis is simpler than a tracked one

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. The kit is supplied unassembled and unpainted, and glue and paints are not included in the package, unless stated otherwise.

Yes. The same vehicle also comes out as a finished collector's model, assembled and painted from the factory. This boxing is a kit, which has to be built.

The chassis. The model is tall, so it has to be built in such a way that all four wheels sit down on the surface, otherwise any lean shows at once.

Yes. A wheeled chassis is markedly simpler than a tracked one, and 1:72 scale means a sensible number of parts.

Last seen

1:72 NATO/ISAF Bushmaster-25 %Stock ClearanceFavorite
DragonDR77021:72

1:72 NATO/ISAF Bushmaster

The Bushmaster in NATO and ISAF fit 1:72 is a plastic kit of the tough Australian wheeled vehicle from the manufacturer Dragon. The model is supplied unassembled and unpainted.
3 leftof 5
25.96 €19.48 € You save 6.48 €
TrumpeterTR053311:350

1:350 HMS Eskimo Destroyer 1941

The Trumpeter 1:350 HMS Eskimo 1941 is an injection-molded plastic kit of the British Tribal class destroyer. The kit contains a photo-etched fret and a stand.
In stock
25.56 €
Kits-WorldKW320441:32

1:32 B-25H Mitchell

A sheet of decals for two B-25H-5 Mitchell machines of the 100th Bomb Squadron, the Pacific in 1943. The inscriptions Power House and Dutch in 1:32 scale.
In stock
13.56 €
WoodlandWB1390

Cinders Coarse Ballast Shaker

A coarse scatter in the shade of clinker, a 945 cm³ shaker. The material for ash pits, spoil heaps and the surfaces by industrial plants.
In stock
13.56 €
1:48 McDonnell F-4C Phantom
-20 %
Favorite
EduardED4914861:48

1:48 McDonnell F-4C Phantom

A photo-etched add-on set for the kit of the McDonnell F-4C Phantom combat aircraft in 1:48 scale, the manufacturer's part number 491486.
In stock
20.80 €16.64 € You save 4.16 €
Cobra Motor Giallio Modena
-20 %
Favorite
AMMO of Mig JimenezA.MIG-0305

Cobra Motor Giallio Modena

Cobra Motor Giallo Modena is a water-thinnable acrylic paint from the AMMO automotive line. A saturated yellow shade in the style of Italian sports cars, for the brush and for the airbrush.
In stock
5.96 €4.77 € You save 1.19 €
Yamamoto Model PartsYMP48011:48

1:48 Wsporniki

A set of brackets in 1:48 scale for models of military equipment. Small fittings for building up the details on the hull, the fenders and the sides of a vehicle.
In stock
6.36 €
HasegawaHAHC241:24

1:24 BMW 2002 turbo

An injection-molded plastic kit of the classic BMW 2002 turbo sports sedan in 1:24 scale from Hasegawa.
In stock
30.76 €
1:48 F6F-3 Hellcat cockpit set
-20 %
Favorite
AiresAIR43561:48

1:48 F6F-3 Hellcat cockpit set

A resin detail set of the cockpit for the F6F-3 Hellcat in 1:48 scale from Aires . It is not an airplane model but an accessory that raises the fidelity of the cockpit interior of a kit.
In stock
16.80 €13.44 € You save 3.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.